48GX - Silly question?
#1

Hi there,
Still finding my way around the 48GX.
Maybe a silly question. I remember seeing on both the TI-92+
& TI-89, that if you keyed in the factorial 100! - it calculated & displayed the whole 157 digit factorial, that you could literally scroll though. It could even calculate higher values..

Putting aside the reason for a 'need' for this...
Can, or is there a way that the HP 48GX can ALSO display either the details of an exponent of large calculation OR the results to such a high degree of digits, like 100!

48GX 100! = 9.33262154439E157
TI-89 100! = All 157 digits

IF TI deemed this ability useful ... What is HP's response in like for like capability?

Many thanks
Al

#2

HP-50G gives all digits too. You just have to use Exact mode and type the number without a decimal point.

#3

You need ALG48 or Erable (I can't remember whether either will do it) or other software loaded onto the 48GX to do that. In the 49G and all later versions (49G+, 50G) HP incorporated that feature as "exact" mode.

#4

Quote:
48GX 100! = 9.33262154439E157
TI-89 100! = All 157 digits

IF TI deemed this ability useful ... What is HP's response in like for like capability?


It's called the HP 49g+ and the HP 50g. (Integer calculations in EXACT vs. APPROXIMATE mode. The HP 48 series has no equivalent mode.)

#5

Ah..
So it's a CAS feature. that explains things.
Many thanks
Al

#6

The 48GX is from 93 and the TI-92 (the first one with such a feature) is from 95 :). That may explain why they cannot be actually compared. (I like some features from the 92 but I hardly use it).

Edited: 18 July 2011, 3:32 p.m.

#7

Hi,

This is not a silly question, but an interessant computing challenge on both HP28 and HP48 advanced calculators.


Fortunately, and without any "Erable" add-in or any newer CAS feature, any HP-48 are able to compute and display any digits of the n! factorial by using a quite easy and not so elaborated dFACT program which was compose by myself in 1989 for the same purpose on a HP-28S.

For easy reading and printing dFACT returns all digits of the n! factorial into the stack by ten-digit numbers.
Printing will be easy with print stack command PRST and storing all this stuff in a list by using DEPTH ->LIST sequence.

 « -> n                           @ input n from stack
« n ->STR 33 CHR + 61 CHR + @ put string "n!=" on top of stack
2 ‘d’ STO @ initialize dimension d
1 @ initialize stack with 1!
1 n FOR k @ main loop n!=1*2* ... *k*...*n
0 @ zero carry
2 d FOR p @ for each of the d ten-digit-number
p ROLL @ p-th ten-digit from stack
k * @ multiply by k
+ @ add carry
1E10 MOD @ ten-digit rest
LAST / IP @ set and round carry
SWAP p ROLLD @ roll ten-digit back in stack
NEXT
IF DUP @ test last carry
THEN @ if any
d ROLLD @ add one more ten-digit in stack
‘d’ 1 STO+ @ increase d value
ELSE
DROP @ erase null carry
END
NEXT
»
»
‘dFACT’ STO

Examples:

0 dFACT                -->2:                "0!="
1: 1

1 dFACT -->2: "1!="
1: 1

5 dFACT -->2: "5!="
1: 120

13 dFACT -->2: "13!="
1: 6227020800

14 dFACT -->3: "14!="
2: 8
1: 7178291200

17 dFACT -->3: "17!="
2: 35568
1: 74280960000

Upto ther nothing special and results are equivalent to built-in FACT instruction.

23 dFACT               -->4:               "23!="
3: 258
2: 5201673888
1: 4976640000


100 dFACT --->17: "100!="
16: 93326215
15: 4439441526
14: 8169923885
13: 6266700490
12: 7159682643
11: 8162146859
10: 2963895217
9: 5999932299
8: 1560894146
7: 3976156518
6: 2862536979
5: 2082722375
4: 8251185210
3: 9168640000
2: 0
1: 0


Main inconvenient is exponential computation time, on HP28C/S :
10! Need only 2"00, 50! nearly 11"48, 100! is about 44"94, 150! as long as 1’45"05, . . . , 400! In nearly 16’30" and at least 446! in 21 very long minutes.


Source (in Fench only): http://www.silicium.org/forum/viewtopic.php?f=46&t=20757&start=45

#8

Very Cool!

#9

Excellent little program!
Thank you for the suggestion

#10

Quote:
Main inconvenient is exponential computation time,

Anyway, your algorithm appears to be about three times faster than the one in the last message of this old thread, for the HP-41/HP-42S:

http://www.hpmuseum.org/cgi-sys/cgiwrap/hpmuseum/archv016.cgi?read=108035

The author has used a LOG instruction somewhere in his program, which may have slowed it down a bit.

Thanks for sharing it.

Gerson.



Possibly Related Threads…
Thread Author Replies Views Last Post
  Silly me... I also bought a 12C and 15C Eelco Rouw 3 2,302 12-10-2013, 04:42 PM
Last Post: Stephan Matthys
  HP-48GX & 50G Question Matt Agajanian 2 1,910 12-08-2013, 10:17 PM
Last Post: Matt Agajanian
  48GX Repair Question Ron 3 1,363 11-09-2006, 12:30 AM
Last Post: Ron
  Testing an HP 48GX RAM Card - Question jbssm 7 2,049 02-24-2006, 06:38 PM
Last Post: James M. Prange (Michigan)
  HP 48gx construction quality question Joe Edwards 7 2,046 02-12-2006, 06:16 PM
Last Post: Joe Edwards
  Silly people in HP calculator market... Will 19 4,950 09-19-2005, 03:58 AM
Last Post: tony (nz)
  Almost as silly as a $28k grilled cheese Ebay Watcher 3 1,411 12-03-2004, 11:59 AM
Last Post: M.Currie
  OK, this is just plain silly Jim Creybohm 8 2,257 06-14-2004, 04:24 AM
Last Post: Meindert Kuipers
  48gx question Johann 11 2,754 05-06-2004, 04:58 PM
Last Post: marc
  Question for HP-48GX Experts john smith 6 1,967 08-19-2003, 06:36 PM
Last Post: Ben Moss

Forum Jump: