Posts: 372
Threads: 42
Joined: Mar 2011
I just received the components to add a crystal to the repurposed 30b (thanks Eric). I opened the calculator, and it's quite obvious where I should put the crystal; but I have no idea where to put the capacitors (there are many empty pads), and I couldn't find any info around. So... Where do the capacitors go? :)
Thanks,
Cristian
Posts: 3,229
Threads: 42
Joined: Jul 2006
They go immediately to either side of the crystal.
They are labelled C3 and C4 on the 20b's PCB.
- Pauli
Posts: 4,587
Threads: 105
Joined: Jul 2005
... and they are really small. Precision soldering :-/
Walter
Posts: 372
Threads: 42
Joined: Mar 2011
OK, thanks! They really are smaller than I expected... I hope I won't damage anything!
Cristian
Posts: 464
Threads: 10
Joined: Jan 2005
For my 47 years old eyes, a magnifier was mandatory.
Also, no ristretto or Red Bull for 12 hours prior to the modification and you should be set.
Steroids necessary to open the 30B case.
I succeeded by pressing hard on the side with thumb and inserting a FINE PLASTIC spudge in the opening whilst keeping the central part flat with the palm.
And yes, you need 3 hands for this: my daughter helped on this one :-)
Etienne
Edited: Didn't notice that Cristian had already opened the case. Sorry
Edited: 10 July 2011, 11:35 a.m. after one or more responses were posted
Posts: 3,283
Threads: 104
Joined: Jul 2005
HP should have added the capacitors, at least. I don't think it adds to manufacturing costs in any sensible way.