Numerical Integration: HP, TI, etc.
#1

I feel like this has been discussed before, but I can't find any info.

It's generally claimed that many, if not most, calculators that have numerical integration capabilities usually use an Adaptive Gauss-Kronrod Quadrature method.

Today in my Calc II class I introduced the students to this numerical method by first integrating Cos[1/(8-x)] from 0 to b, changing b from 5 to 6, 7, and 8 to show them the computing time increases substantially. From there we looked at a little G-K theory.

We discovered the TI calculators will eventually compute a result for b=8, but takes several minutes due to the improper upper limit. The value it gives is 6.491864009, while Mathematica gives 6.4916765549 (claiming to use Guass-Kronrod). So, the TI was accurate to 3 decimal places using an undetermined number of nodes.

However, testing with Mathematica, a Gauss-Kronrod 63 point quadrature only gives, 6.42284; way off. Even a 1000+ point quadrature doesn't give the same accuracy as the TI. And I know the TI isn't doing a 2000 point quadrature. So, what other strategies are being used?

Also, back to HP. My HP-42S, when setting the accuracy to 0.001, I get 6.4811 (almost within 0.01 not 0.001) after several minutes. So, what method is the 42S using?

I wish I took more numerical analysis 30 years ago.

Thanks,
CHUCK

#2

I hope these and (the still working) links therein may help:

http://www.hpmuseum.org/cgi-sys/cgiwrap/hpmuseum/archv016.cgi?read=94446

http://www.hpmuseum.org/cgi-sys/cgiwrap/hpmuseum/archv016.cgi?read=95394

http://www.hpmuseum.org/cgi-sys/cgiwrap/hpmuseum/archv016.cgi?read=104550

#3

The classic implementation of the Integrate function (HP-34C, 15C and others) uses a kind of adaptive Romberg method. With every iteration more and more (clevery placed) nodes are used. The integration limits are not evaluated so that a result can be determined even if the function is not defined there.

Please take a look at this page in the articles section. There you will also find a reference to a detailled discussion of the Integrate function and its properties on the 34C, written by W.H. Kahan in HP magazine issues more than thirty years ago.

FWIW: the 35s, set to FIX 3, returns 6,491 for the mentioned integral.

Dieter

#4

Much thanks Gerson and Dieter. I now have some good reading to do. And a lot of experimenting. Other good integrals to test are the Fresnel functions. I've found a few calculators have trouble with these as well.

CHUCK

#5

While you're at it, try integrating FRAC(x) (the fractional portion of x, sometimes called FRAC, sometimes called FP, depending on the calculator) from 0.0 to 6.4 . All HP calculators fail spectacularly on this simple function, but at least they do it quickly :-(

#6

FP is a spectacularly non-analytical function... All the clever quadrature algorithms assume that the function to be integrated is well-behaved. Functions that go wild like cos(1/x) around x=0, or FP which is discontinuous at all integers, are always going to be a problem. This is why numerical integrators on calculators will never be a complete substitute for actual mathematical insight.

#7

WolframAlpha gets it right:

http://www.wolframalpha.com/input/?i=integrate+%5Bx+-+Floor%28x%29%5D+from+0+to+6.4

#8

Cool. They also fail spectacularly slowly. I played around with the limits a bit. Lower=0 and upper=2 on the HP42 was integrating for about an hour (forgot it was on and let it sit unattended). I ended up hitting EXIT so as to not run out of batteries. (accuracy was set at 0.00001)

#9

Quote:
While you're at it, try integrating FRAC(x) (the fractional portion of x, sometimes called FRAC, sometimes called FP, depending on the calculator) from 0.0 to 6.4 . All HP calculators fail spectacularly on this simple function, but at least they do it quickly :-(

The HP71 does indeed fail (and quickly at that):

  >INTEGRAL(0,6.4,0,FP(IVAR))

1.28

but just halving the interval gives a decently correct result:

  >INTEGRAL(0,3.2,0,FP(IVAR))+INTEGRAL(3.2,6.4,0,FP(IVAR))

3.08006142853

My own experimental integration program succeeds as well at minimum settings:

  >200 DEF FNF(X)=FP(X)
>RUN
X1,X2,Err,# Points: 0,6.4,1E-10,2

32 3.08 .16

which is the exact result, not a 5-digit approximation like the one obtained with the halving trick above.

Best regards from V.

#10

I thought about giving a positive example where INTEG (nested with SOLVE, no less) *works* as advertized - albeit painfully slowly, that's for sure.

Here's a program to calculate the zeroes of the Bessel functions of integer order, J(n,x). Just input the order and wait for the calculated values to appear. Hitting R/S again will continue the search in ascending order.

Using V41 in TURBO mode is highly recommended :-)

Cheers,
ÁM.

1	LBL "ZJYX"
2 RAD
3 N=?
4 PROMPT
5 STO 00
6 1
7 LBL 00
8 3
9 +
10 "JYX"
11 SOLVE
12 STOP
13 GTO 00
14 RTN
15 LBL "JYX"
16 RAD
17 STO 01
18 "*JN"
19 0
20 PI
21 INTEG
22 PI
23 /
24 RTN
25 LBL "*JN"
26 RCL 00
27 *
28 X<>y
29 SIN
30 RCL 01
31 *
32 -
33 COS
34 END

PS. use this link to check the results:

http://mathworld.wolfram.com/BesselFunctionZeros.html


Edited: 25 May 2011, 10:19 a.m.

#11

>All HP calculators fail spectacularly

Hmm, the one I am using doesn't. Returns 3.08 as expected. . . ;-)

TW

#12

Yeah, the HP50g gives 1.28 in much less than a second.

The TI89 gives the correct answer of 3.08, taking about 15 seconds.

It looks like what's happening with the HPs is that it first does a midpoint rectangle rule ( FP(6.4/2) = FP(3.2) = 0.2. Then 0.2*6.4 = 1.28).

I'm not sure why it terminates there, though.

I'd guess if it wanted to add more points, it would go to three point normal Gaussian integration (so it could reuse the middle point). But if you do that, you get 3.057777777..., not the same answer, and in fact one that is much closer to the correct answer.

#13

Boy, even that halving trick doesn't work for the HP50g. Maybe it *eventually* gives the right answer, but after it ran for several minutes I just aborted the evaluation.

The TI89 still gives exact answers for the halved intervals, and fairly quickly.

#14

The scheme used, as far as I can tell on every HP calculator that has a built-in integrator, is a modified Romberg with argument scaling designed to reduce problems with periodic functions. The Romberg terminates when three passes evaluate to the same value under the current display setting.

The first pass is a one-point midpoint rule, evaluated at 3.2, giving 1.28.

The second pass adds evaluations at 1.0 and 5.4, which also gives 1.28.

The third pass adds evaluations at 2.025, 4.375, .275, and 6.125, which also happens to come out as 1.28. Since these three results agree regardless of the display setting, the routine decides it must be correct and terminates.

I stumbled across this particular example quite by accident. But when the result came out this bad, I had to investigate.

#15

Now I'm curious. Which calculator are you using?

Cheers

Thomas

#16

I was hoping Tim was using an HP 15c+, but the "nonpareil-15c" app, on OSX, result is 1.2800.

#17

'Tis a secret. :-)

TW

#18

He's using the 30b with a 64 point Gaussian Quad program.

#19

In the spirit of this thread, I hope Tim is bragging about an HP scientific that accurately integrates Kiyoshi Akima's challenge out of the box. That is, using HP Integrate; no programming required.

Otherwise he could be using a WP34s!

#20

Quote:
All the clever quadrature algorithms assume that the function to be integrated is well-behaved.

Now consider the following polynomial of 6th degree:

f(x) = 44 (x-1) (5 x-27) (5 x-16) (8 x-49) (8 x-35) (40 x-81)/4671275427
+ 4 (x-1) (5 x-27) (5 x-16) (8 x-49) (8 x-35) (40 x-11)/701819181
+ 25 (49-8 x) (x-1) (5 x-27) (8 x-35) (40 x-81) (40 x-11)/3658919121
+ 4 (x-1) (5 x-27) (5 x-16) (8 x-49) (40 x-81) (40 x-11)/233939727
+ (49-8 x) (x-1) (5 x-16) (8 x-35) (40 x-81) (40 x-11)/159262983
+ 4 (x-1) (5 x-27) (5 x-16) (8 x-35) (40 x-81) (40 x-11)/4671275427

It was chosen to match exactly the FRAC function at the points mentioned by Kiyoshi Akima:

{0.275, 1, 2.025, 3.2, 4.375, 5.4, 6.125}.

This polynomial is well behaved but still the programs that fail with FRAC will also fail with this function.

Cheers

Thomas


Here's a C++ program for those who'd like to verify:

#include <stdio.h>
#include <math.h>

double f(double x) {
return
44*(x-1)*(5*x-27)*(5*x-16)*(8*x-49)*(8*x-35)*(40*x-81)/4671275427LL
+4*(x-1)*(5*x-27)*(5*x-16)*(8*x-49)*(8*x-35)*(40*x-11)/701819181LL
+25*(49-8*x)*(x-1)*(5*x-27)*(8*x-35)*(40*x-81)*(40*x-11)/3658919121LL
+4*(x-1)*(5*x-27)*(5*x-16)*(8*x-49)*(40*x-81)*(40*x-11)/233939727LL
+(49-8*x)*(x-1)*(5*x-16)*(8*x-35)*(40*x-81)*(40*x-11)/159262983LL
+4*(x-1)*(5*x-27)*(5*x-16)*(8*x-35)*(40*x-81)*(40*x-11)/4671275427LL
;
}

double x[] = {
0.275, 1.0, 2.025, 3.2, 4.375, 5.4, 6.125
};

int main() {
for (int i = 0; i < 7; i++) {
printf("%d: x = %5.3f frac(x) = %8.6f f(x) = %8.6f\n", i, x[i], x[i] - floor(x[i]), f(x[i]));
}
}

It creates the following output:

0: x = 0.275    frac(x) = 0.275000   f(x) = 0.275000
1: x = 1.000 frac(x) = 0.000000 f(x) = 0.000000
2: x = 2.025 frac(x) = 0.025000 f(x) = 0.025000
3: x = 3.200 frac(x) = 0.200000 f(x) = 0.200000
4: x = 4.375 frac(x) = 0.375000 f(x) = 0.375000
5: x = 5.400 frac(x) = 0.400000 f(x) = 0.400000
6: x = 6.125 frac(x) = 0.125000 f(x) = 0.125000
#21

Quote:
Otherwise he could be using a WP34s!

The 34s isn't that accurate. It is using an 10/21 point Gauss Kronrod method with no adaptive component.

If someone wants to write a better integration routine, we'd be very interested.


- Pauli

#22

I get
1.28 on the HP 50g almost instantly[br]
3.08 on the Casio Prizm fx-CG 10 almost instantly[br]
3.08 on the TI 84+ after a half of second
1.28 on the HP 35S almost instantly
3.08 on the nSpire CX almost instantly
And 3.1121563505 on SpaceTime iPod/iPad app


Edited: 26 May 2011, 9:46 p.m.

#23

Why would all estimations fail on this polynomial?

Gauss/Kronrod quadratures provide some guarantees about correctness when integrating polynomials. I believe Gaussian quadratures of order n are exact for polynomials of degree 2n-1 or less (I might be out by +/- 1 on the degree, it has been a while). Kronrod quadratures extend the Gauss quadrature by using the Gauss points and additional points that provide two estimates of the integral, They do, however, lose something on the degree of polynomial they handle exactly when compared to a Gaussian quadrature with the same number of points (the degree change here has slipped my mind for the moment).


- Pauli

#24

Quote:
Why would all estimations fail on this polynomial?

I wrote: "programs that fail with FRAC will also fail with this function."

My assumption was that they fail with FRAC for the same reason as explained in Message #22.

It's obvious that numeric integration algorithms may have problems with "functions that go wild" but this is not obvious in the case of the FRAC function.

You can always construct a polynomial for which a specific integration algorithm fails. What surprised me was that the algorithm used in HP calculators fails for such a simple function as FRAC.

Those who think the polynomial given above is too complicated may try to
integrate x^2(x^2-47^2)(x^2-88^2)(x^2-117^2) from -128 to 128.

My HP48 gives 0 as a result whereas WolframAlpha returns 2.72663x1016.

Cheers

Thomas

Edited: 27 May 2011, 4:19 a.m.

#25

The 34s gets 2.72663118082 x 1016.

This isn't surprising given that the algorithm used should be exact for this polynomial. However, it fails badly for FRAC.

Pauli

Edited: 27 May 2011, 4:21 a.m.

#26

Quote:
What surprised me was that the algorithm used in HP calculators fails for such a simple function as FRAC.

It's also a matter of the limits. The built-in integrator works perfectly well integrating FRAC from 0 to 1, for example. Or from 0 to 3. It has a little more difficulty with integrating from 0 to 2. Also note that it does come up with a more-or-less correct answer if the upper limit is changed from 6.4 to 5.4 .

#27

ND1 (iPhone):

FP(x): 3.08 IERR: 1e-2 (compute time: 3.5s)

cos(1/(8-x)): 6.4916 IERR: 3e-4 (compute time: 3.7s)

That's ND1 v1.3.9 (the next update).

Does anyone have a pointer to a good test suite of functions for quality-testing numerical integration? (Or a set, willing to share?)

EDIT: Reflected change in software to only returning digits believed to be accurate.

Edited: 28 May 2011, 5:56 a.m.

#28

Re your original question about the TI and Mathematica results for cos(1/(8-x)).

You're saying "while Mathematica gives 6.4916765549 (claiming to use Guass-Kronrod)".

Can you tell us exactly how you tested? Are you sure about it using Gauss-Kronrod?

I spent some time in keisan which permits playing with a number of integration schemes, incl. Gauss-Kronrod.
keisan num integration

I can confirm that Gauss-Kronrod (for n=15, 41, 71), does *not* return good results, just as you found in Mathematica. (Using some *other* kind of testing, I assume.)

Interestingly, the result for n=63 does not match the one you got in Mathematica. At 6.46.. it's a little better.

n=15
Gauss-Legendre 7 6.876098950292528094576
Gauss-Kronrod 15 6.574616683680514255335
accuracy - 7

n=41
Gauss-Legendre 20 6.57836956143155286915
Gauss-Kronrod 41 6.566852251450387088799
accuracy - 6.6

n=63 (slow)
Gauss-Legendre 31 6.46414119548917882461
Gauss-Kronrod 63 6.460665043695674082197
accuracy - 6.46

n=71 (slow)
Gauss-Legendre 35 6.392977564788352852733
Gauss-Kronrod 71 6.479392744161763499238
accuracy - 6.5

I'm unable to obtain a result good for two decimal places using *any* of the integration methods and ranges for n supported by keisan, even when the server is busy for 15s or so!

Instead, I'm getting frequent input errors with some methods (=function not accepted) and compute errors for "high" values of n.

Using a different implementation, I know that a 2K Gauss-Legendre integration returns 6.4902... which is still worse than your TI result.

WolframAlpha returns a result good to 5 decimal places. Assuming the keisan results are correct, and Gauss-Kronrod does not return a good result for this function using "typical" values of n, I suppose it either

- uses much higher values for n

- or, uses a different integration scheme for this function

- or, quite simply (for Mathematica), integrates symbolically and evaluates!

(ND1's result, which is accurate to 4 decimal places, is obtained via double exponential integration with a computational expense roughly equivalent to a 512-point Gauss integration.)


Edited: 28 May 2011, 6:01 a.m.

#29

Quote:
WolframAlpha returns a result good to 5 decimal places...

... I suppose it either

- uses much higher values for n

- or, uses a different integration scheme for this function

- or, quite simply (for Mathematica), integrates symbolically and evaluates!


Most likely the latter, as we can verify by submitting "Integrate Cos[1/(8-x)]dx, from 0 to 8" to WolframAlpha:

http://www.wolframalpha.com/input/?i=Integrate++Cos%5B1%2F%288-x%29%5Ddx%2C+from+0+to+8

The closed form solution is:

8*cos(1/8) - pi/2 + Si(1/8)

Of course Si(1/8) requires a numerical method, but Si(x) is a well-behaved function. By using this result, we can get nine correct digits on the HP-15C:

01- f LBL A
02- SIN
03- x<>y
04- /
05- g RTN

That's the program used to integrate Si(x) or sin(x)/x in the HP-15C manual.

keystrokes             display

f FIX 9 g RAD 0 0
ENTER 8 1/x 0.125000000
Integrate A 0.124891544 (after 57 seconds)
8 1/x COS 8 * + 8.062472882
pi 2 / - 6.491676555

The WolframAlpha result, when asking once for "More digits" is:

6.4916765549444080584305794664323142891737666776228076872897082214341676072377297600588699656218932943

Now, changing the upper limit a bit and multiplying the integral by 100 for a weird result :-)

Integrate  100 Cos[1/(8-x)]dx, from 0 to 100*(1/3+Exp[-pi])^2/W[100*(1/3+Exp[-pi])^2]

Edited: 28 May 2011, 11:17 a.m.

#30

Quote:
Now, changing the upper limit a bit and multiplying the integral by 100 for a weird result :-)

Integrate  100 Cos[1/(8-x)]dx, from 0 to 100*(1/3+Exp[-pi])^2/W[100*(1/3+Exp[-pi])^2]

Let's see ...

   1   DEF FNW(X)=FNROOT(0,10,FVAR*EXP(FVAR)-X)
2 N=100*(1/3+EXP(-PI))^2 @ DISP INTEGRAL(0,N/FNW(N),0,100*COS(1/(8-IVAR)))

>RUN
665.999991757

... so I guess your "weird result" was intended to be 666.

As for the original troublesome integral, this keyboard statement ...

    INTEGRAL(0,7.99,0,COS(1/(8-IVAR)))+INTEGRAL(7.99,8,0,COS(1/(8-IVAR)))

6.4916773758

... gives the result correct to 7 digits.

Best regards from V.


Edited: 28 May 2011, 10:36 p.m.

#31

Quote:
   >RUN
665.999991757

Emu71 does it instantly. I had to try it on the real thing: only 35 seconds! The HP-71B with the MATH ROM never stops amazing me!

Best regards,

Gerson.



Possibly Related Threads…
Thread Author Replies Views Last Post
  Integration question and "RPN" mode comment Craig Thomas 16 5,945 12-05-2013, 02:32 AM
Last Post: Nick_S
  HP Prime numerical restrictions? Alasdair McAndrew 4 1,901 11-16-2013, 05:32 PM
Last Post: Alasdair McAndrew
  HP Prime numerical precision in CAS and HOME Javier Goizueta 5 2,500 11-16-2013, 03:51 AM
Last Post: Paul Dale
  HP Prime vs TI : Factoring ? HP Pioneer 7 2,479 10-29-2013, 02:00 PM
Last Post: CompSystems
  WP34s integration trapped in infinite loop Bernd Grubert 25 7,165 10-17-2013, 08:50 AM
Last Post: Dieter
  HP Prime integration Richard Berler 1 1,230 10-06-2013, 10:52 PM
Last Post: Helge Gabert
  [HP-Prime] AMBIGUITY between Numerical Calculation (HOME) and Numerical/Symbolic Calculation (CAS mode) CompSystems 2 1,477 08-18-2013, 07:06 PM
Last Post: CompSystems
  OT: My brain is failing me again. Help with numerical / mechanical problem required. Harald 4 1,855 07-01-2013, 10:31 AM
Last Post: Harald
  integration on 39gII emulator Wes Loewer 29 7,356 06-07-2013, 05:58 PM
Last Post: Chris Smith
  WP-34S Integration Richard Berler 15 3,886 03-08-2013, 02:29 AM
Last Post: Walter B

Forum Jump: