12C with sticky keys
#1

Some of the keys on my ancient HP 12C have stopped working. How easy is it to take apart and clean, please?

David

#2

First of all: I have an old 12C with no LCD but perfect working keyboard, if you are interested get in contact with me!

This procedure workes for me, maybe others have better ways of doing it:
-take out the batteries

-open the case (four screws under the four rubber feet)

-take care not to lose the two tiny springs!

-cut the many black melted heads of plastic carefully with sharp knifeblade
(take care not to slip and if possible go underneath and lift up. This way you have a chance to end up with enough plastic to melt again afterwards

-lift up the PCB carefully and out of the case

-underneath the rubber mat are the keys

-clean! Maybe thats all that is needed, otherwise replace parts from an other 12C and put back together in reverse order

-to melt the PCB back in place, put it firmly and tightly back into the case, use a solderung gun to warm the plastic and press it flat with one finger.
Do this for all the plastic rods.

If possible take some ESD precautions!

Maybe after all, it's just easier to buy an old working 12c from EBAY? Just don't throw your old buddy out: the LCD is still a great replacement part for other Voyagers! (Now you know why mine has no LCD anymore! It's in a 11C :-)

Cheers an good luck

#3

Pulling the keyboard completely out of Voyager to clean a few problematic keys is totally unnecessary as keys can be easily cleaned from the exposed back side of the board through the key vent hole.

Make a miniature wire brush from a few strands of stiff brass wire cut from a small wire wheel. Chuck them in a pin vise and trim the ends flush. Place a few drops of isopropyl alcohol into the key dome and scratch around with the wire brush. Repeat if needed.



Possibly Related Threads…
Thread Author Replies Views Last Post
  Video of Ghost HP-11C keys on HP-12C Max Stone 2 1,292 04-08-2013, 07:39 PM
Last Post: Michael de Estrada
  HP 12C, 12C Platinum & 15C iOS App Walter Lam 2 1,368 06-02-2011, 01:25 PM
Last Post: Andrés C. Rodríguez (Argentina)
  HP-15C Sticky Keys aj04062 8 2,384 02-07-2011, 09:14 PM
Last Post: aj04062
  Heat staked keyboards with sticky, bouncy or corrosion present keyboard PCAs Geoff Quickfall 12 3,310 08-15-2009, 07:55 PM
Last Post: Geoff Quickfall
  HP-12c Windows emulator shortcut keys Don Shepherd 0 707 07-04-2009, 09:19 PM
Last Post: Don Shepherd
  A pair of 21S with sticky keys Peter Klein 8 2,105 04-01-2009, 03:40 PM
Last Post: Randy
  Squeeky keys on 12c Igor Vilensky 0 686 10-29-2007, 02:14 PM
Last Post: Igor Vilensky
  HP41cv sticky keys Michael Sayers 3 1,151 04-17-2007, 07:52 PM
Last Post: Randy
  OT sticky plastic Charlie O. 6 1,621 03-20-2007, 11:03 AM
Last Post: Frank Boehm
  Sticky on button HP32SII Leo 1 960 10-24-2006, 07:49 AM
Last Post: Jeff O.

Forum Jump: