PIL Box - communication with an external HP71B

since a couples of years I did use the ISA HPIL board, however, since I was trying to switch to PIL Box I have to admit I’m somehow lost (frankly speaking I do not feel like an HPIL expert).

I do hope somebody could briefly describe his procedure how to exchange files from the Emu71 HDRIVE1 to a real HP71B and backwards?

My “simple” environment looks as follows:
Emu71 (latest version), PIL Box (via COM2), ILPer (via COM2), real HP71B

FTDI driver installed (driver setup OK), ILCtrl shows Device ID (1): HP71, ILper shows my “hdrive1.dat” in Mass Storage LIF file: (nothing else, no error message)

In the past I used the following procedure, which worked perfectly:

- communication with an external HP-71B
To exchange program and data files with an external HP-71B, just make it a device by typing
CONTROL OFF on the HP-71B. Then do RESTORE IO on Emu71.
You can now copy files between Emu71 and HP-71B.
Emu71 to HP-71B:
do 'COPY :LOOP' on the HP-71B
do 'COPY file TO :HP71' on Emu71
HP-71B to Emu71:
do 'COPY file TO :LOOP' on the HP-71B
do 'COPY :HP71' on Emu71

I would be very grateful for any help,
Many thanks in advance,


IIRC, you have to use the HDRIVE as buffer when using the PIL box.

Thus, a COPY file TO :TAPE (or whatever addr the HDRIVE is) should work;-)

However what does the doc say?




Raymond, thanks for the advice, I will try tonight,

by the way, which doc are you refering to, is there anything available to look at?

Thanks again, Roland



the COPY to :TAPE works fine, however, to copy the file to :HP71 does not work,
on my real HP71b I got: PILERR: File not found

Do you have any idea, what I could try to overcome

Thanks in advance, Roland


Roland, in case you didn't solve the problem yet: latest Emu71 version should work with the PILBox as with the HPIL ISA board, however it may fail on some systems (== not 100% reliable).

My recommended method for reliable communication between Emu71 and HP71 with the PILBox is to use the IL-Per software (available on my PIL-Box page): do not declare any XIL in Emu71.ini and use IL-Per as a gateway by sharing the hdrive1.dat file: You can now copy files between Emu71 and HP-71B. Do 'COPY file TO :HDRIVE1' on the one side, then do 'COPY file:HDRIVE1' on the other side. Fast and efficient.


Possibly Related Threads…
Thread Author Replies Views Last Post
  How to copy files from 9114B to hard drive via PIL-box? Joe Horn 23 9,423 12-14-2013, 11:57 PM
Last Post: Geoff Quickfall
  Gathering USB dumps for Connectivity Kit <-> 39gII communication... debrouxl 2 1,474 12-01-2013, 12:59 PM
Last Post: Marcus von Cube, Germany
  PIL-box w/o IL cable = paper weight Joe Horn 15 4,527 11-26-2013, 01:05 AM
Last Post: Les Wright
  HP Prime: Number of external Variables Davi Ribeiro de Oliveira 0 843 11-01-2013, 08:10 PM
Last Post: Davi Ribeiro de Oliveira
  HP71B Spy Radio Crypto Donald Ingram 2 1,554 10-14-2013, 10:51 AM
Last Post: Eric Smith
  Box left at HHC Tim Wessman 1 1,466 09-26-2013, 11:05 PM
Last Post: Wlodek Mier-Jedrzejowicz
  wp34s calc to calc communication Andrew Nikitin 1 1,056 07-29-2013, 01:57 AM
Last Post: Marcus von Cube, Germany
  HP71B to HP 41 Translator ROM Manual Michael Lopez 5 1,960 04-25-2013, 03:51 AM
Last Post: Mike (Stgt)
  Rather large missed opportunity - a pile of HP71B's Chris Smith 3 1,392 04-19-2013, 07:30 AM
Last Post: Chris Smith
  Has anyone else had problems with ebay member 'hp71b'? Dan Grelinger 6 2,084 01-26-2013, 09:33 AM
Last Post: aurelio

Forum Jump: