HP-48SX Repair - Diode
#1

I think I just did a stupid thing.

late last night I was trying to resurrect a 48SX that had/has a battery acid damaged keyboard.

I have a 3 cell batter holder to test the unit before putting the back on. I think I reversed the polarity of it and momentarily smelled overheating electronics before I pulled it. Prior to this, I did resuscitate the unit, but the LCD screen had lines (I hadn't tightened the clips).

Is it permanently dead? I've read doing this will fry the zener diode. Where is it? Can I replace it?

#2

The zener diode is right at the positive battery terminal (looks like a Y-shaped SMD).

As for the lines on the display, if it's missing lines then you simply did not tighten the twist-tabs tight enough. If on the other hand you see garbled pixels then it's because your screen is no longer in alignment with the LCD connectors on the PCB. Just realign the screen until it is as close to center as possible.

#3

Can you suggest a way to test the board/display funtioality seperately from the keyboard? The previous owner let the batteries leak onto the keyboard. I think this is the source of the problem, but I'd like to isolate it.

If it is the problem , then I need to try and fix the keys. Looks like a pain to pull that apart.

#4

Sorry Han,
1 more question, Can I bypass the zener to tell if I cooked it?



Possibly Related Threads...
Thread Author Replies Views Last Post
  The HP Graphers 48SX - 50G Jedidiah Smith 11 1,233 04-08-2013, 08:35 PM
Last Post: gene wright
  Error Message/Procedure HP-48SX with TDS Survey SX card bporter101 6 916 12-10-2012, 10:18 AM
Last Post: bporter101
  Need help - HP 48SX bank switching 1MB card JJB299 1 435 11-07-2012, 07:34 AM
Last Post: Raymond Del Tondo
  HP 48SX equation library card transfer Vincent Weber 3 661 09-01-2012, 10:23 AM
Last Post: aurelio
  HP 48SX Solve Equation Library Cards Mike Hein 3 704 08-22-2012, 01:07 PM
Last Post: Chris Dreher
  [WP-34s] Updated: How to install crystal and IR diode Alexander Oestert 2 583 06-17-2012, 12:19 PM
Last Post: Geoff Quickfall
  Stack Replacement for HP 48SX bluesun08 2 529 05-17-2012, 02:35 PM
Last Post: bluesun08
  [WP-34s] How to install crystal and IR diode.pdf Alexander Oestert 27 2,547 05-04-2012, 06:21 AM
Last Post: Dominic Richens
  Odd Bringslid HP 48SX aj04062 1 389 05-01-2011, 01:26 AM
Last Post: Jesse Dodd
  48sx Numerical Integration Question svisvanatha 4 626 03-10-2011, 06:38 AM
Last Post: svisvanatha

Forum Jump: