HP41 bugs - testing

Hi All, are there comprehensive test steps written down somewhere to determine which bugs a 41c has ? If so, can someone point me to those please ?



You should have been there (when the HP-41C was launched in 1979)!!


A full list is in "Extend Your HP-41" available on the DVD Version 7

Main versions:

ROM   Date codes   Comments
DDE 1926-1940
FDE 1936-1952
FEE 1951-2034
GFF 2035-84??
HFF 84??-Present CV version
NFL 2329- Present current CX version

John, if you scroll to to the bottom here you see the range of serial numbers which have specific bugs.

A simple test to see if you have most/all bugs is the following:
49, Sto 00, SF IND 00

If the Bat-indicator goes on you have bug 3 and hence most likely all other bugs as well.



Edited: 3 Mar 2010, 11:48 p.m. after one or more responses were posted


For bug 1:

48 SIGMA+ LASTX ... if 48 is not displayed, it has bug 1.

For bug 2:

999 ENTER 3 STO IND Y.... if this works, it has bug 2.

For bug 3:

49 STO 00 SF IND 00...if the BAT indicator turns on, it has bug 3. Note: this is 49, not 59.

BUG 4 is bad results from SIN for small angles. Can't remember the arguments.

The information below is from http://www.finseth.com/hpdata/hp41c.php

#4: Early models compute the SIN of small angles incorrectly.

#5: CLP would only clear 1089 program lines.

#6: -67A/-97A prorams that contain combinations of number entry, EEX, and CHS do not translate correctly. Example:


translates to


instead of

1E-7 -5

#7: The second nybble of the seventh byte of Alpha is copies along
with the first six bytes during an ASTO.

#8: Early machines do not decompile programs if they are turned off
during PRGM mode.

#9: Executing CAT 1 while in PRGM mode, then interrupting it with R/S causes step labelling oddities.

#10: If flag 25 is set and MEAN or SDEV causes an overflow, some flags can be altered.

#11 (CW1): If a program at the end of CAT 1 is replaced or deleted, a return to that program will return into the new program or off-program memory.

#12: On early models, the function LN(1+X) gives wrong answers for
values of X between -.9990234374 and -1.00.

#13: On early models, the operation (.1)^-43 gives an answer of
9.999999999E42 instead of 1E43.



And to know we paid sooo much for such faulty machines. I feel cheated by HP. <wink>



Thanks All,

I have a 1954 serial number, with the "tall keys".


Possibly Related Threads...
Thread Author Replies Views Last Post
  Digging for bugs Stefan Dröge (Germany) 2 1,216 11-13-2013, 04:39 PM
Last Post: Stefan Dröge (Germany)
  [HP-Prime] Simple Game (Bugs) CompSystems 1 1,030 11-01-2013, 10:18 AM
Last Post: Han
  HP-35s Cos[x] and Tan[x] bugs resolved? Thomas Windisch 2 1,244 10-31-2013, 01:12 PM
Last Post: Dieter
  RPN bugs both present in Prime Calc and emulator Eelco Rouw 9 2,151 10-16-2013, 12:22 PM
Last Post: Eelco Rouw
  [HP-Prime] AND, OR BUGs? CompSystems 0 733 10-04-2013, 04:03 PM
Last Post: CompSystems
  HP 50g: question about bugs Miguel Toro 2 1,156 09-26-2013, 01:27 PM
Last Post: Miguel Toro
  [HP-Prime xcas] operations with complex numbers + BUGs + Request CompSystems 9 2,855 09-08-2013, 10:40 PM
Last Post: CompSystems
  [HP_Prime] definition of functions, APPLY command and BUGs CompSystems 1 1,078 09-05-2013, 03:59 PM
Last Post: CompSystems
  [HP-Prime xCAS] Review Polynomial Tools + BUGs + Request CompSystems 0 790 09-05-2013, 12:53 PM
Last Post: CompSystems
  HP-Prime: Solution to ambiguity with [ ... ] & another BUGs CompSystems 12 2,825 08-28-2013, 08:48 AM
Last Post: CompSystems

Forum Jump: