I got jinxed: Need help from an Mcode/NoV pro
#1

So, the newly released ICEBOX.ROM version 1G works nicely under M41. When I try to burn it into my NoV-64, it simply doesn't show up. Nothing is in the specified page (checking with Hexedit, there are only zeros - but the rom file is verifiably not empty as I checked it in a text editor). No errors when running ClonixCfgWin.exe and assembling the HEX image. I have tried to burn my NoV-64 with only the ICEBOX1G in page #C or page #D in either flash block. I tried to burn it together with other rom images. Still the same.

Here is where it's good to have a community like this - I hope there are someone here who can try the new image into their own NoV-32/64 (or MLDL) and check if they get a similar result and if possible give me a pointer to what is wrong with the rom. The rom and the source code are on the ICEBOX page.

Any help is highly appreciated.

#2

HI, Geir;

I have already downloaded it from your homepage but I have not uploaded it to the MLDL yet. Will do that and post about it ASAP!

In time: I do not have a NoV64, but I would like to know in which page did you load the ICEBOX1G ROM image. Didi you try loading it in lower addresses (8 or 9)? Just a guess. Some modules who access inner functionality seem to work better when first seen by the system.

Cheers.

Luiz (Brazil)


Edited: 1 Jan 2010, 9:08 p.m.

#3

Hi, Geir;

I loaded the ICEBOX1G.ROM (MLDL2018A, firmware updated) and it listed OK in the HP41. The ROM mapping is like this:

Page#  image
5 HEPAX 1D (4 banks)
8 SRAM (dir empty)
9 SRAM (dir empty)
A Advantage 1D (bank #1
B Advantage 1D (banks #1 & #2)
C CCD OSX
D ICEBOX 1G
E DAVID ASSM
F MNFR LBLS (David Assembler labels)
The ICEBOX 1G appears accordingly and its functions are listed as well. Because I prefer the block catalog feature, I usually leave regular CCD or the reduced CCD-OSX configured somewhere, and in this particular case, ICEBOX 1G header and its functions show perfectly well.

I tested just two functions for functionality and both worked fine: BLNG? and KALNG?. In time: BLNG? emits a very brief tone that can be suppressed with CF 26. Is it normal? There is no mention to such tone in the manual.

Again, I do not own a NoV64, but I'd ask you to confirm if the NoV64 accepts a functionality available with MLDL2000 configuration: to enable or disable a particular image. Again, I do not know if it is possible in the NoV64.

Hope this helps.

Cheers.

Luiz

Edited: 2 Jan 2010, 1:01 a.m.

#4

I tried the same pages as the ICEBOX version 1F...

Seriously weird.

#5

On the BLENG? tone, I will look into it - it's an ineritance from the TOOLBOX.ROM.

#6

I have to chalk this up to a faulty USB stick... :-(

Extensive testing shows this to be the most likely reason.

#7

Hi Geir,

First, Happy New Year and congrats on your ICEBOX job! ;-)

I've checked it on my NoV-64, and runs as expected. (just the functions relative to block swapping within the NoV-64 memory).

It's certainly wierd that the USB connector leads you to such misfunction... eventually it either shouldn'n be able to perform the programming of the module, or failed the verification process.

Good you have it fixed :-) keep on enjoying your toys!!

Cheers

Diego.



Possibly Related Threads…
Thread Author Replies Views Last Post
  HP-41 Clonix&NoV's SW Update. (For the non-Primer's guys out there... :-) Diego Diaz 21 5,627 11-13-2013, 09:00 AM
Last Post: Ángel Martin
  HP-41 MCODE: The Last Function - at last! Ángel Martin 0 1,020 11-08-2013, 05:11 AM
Last Post: Ángel Martin
  RPN-67 Pro 2.0 is here! Willy R. Kunz 12 3,180 09-28-2013, 10:50 AM
Last Post: Michael de Estrada
  RPN-67 Pro updated to v1.2 Willy R. Kunz 29 8,030 06-12-2013, 04:32 PM
Last Post: Willy R. Kunz
  41-MCODE: Auto XEQ+ALPHA possible? Ángel Martin 5 1,896 05-29-2013, 06:15 AM
Last Post: Ángel Martin
  RPN-67 Pro updated Willy R. Kunz 8 2,494 05-16-2013, 05:12 AM
Last Post: Willy R. Kunz
  HP 41 Mcode related Questions Michael Fehlhammer 4 1,911 05-10-2013, 07:09 PM
Last Post: Michael Fehlhammer
  HP-41CL & NoV(-64): Race condition? Geir Isene 11 3,253 05-03-2013, 01:59 PM
Last Post: Diego Diaz
  Warning - Don't update RPN-67 Pro on your iPad Michael de Estrada 9 2,671 05-02-2013, 03:21 PM
Last Post: BShoring
  Latest Clonix/NoV's SW update. Diego Diaz 5 2,108 02-15-2013, 12:12 PM
Last Post: Ángel Martin

Forum Jump: