HP 85B tape drive
#1

I am trying to revive an HP85B to use as a controller for an old V curve tracer. The tape drive seems to be OK and has a good capstan roller, but it gives a STALL error 74 every time I issue a CAT, CTAPE or ERASETAPE command. I managed to find a second tape drive and that one gives the same error. The tape indicator light comes on (briefly) and the tape give a little jump and then the error occurs. Anybody got any ideas about what is going on and how to fix it?

#2

Hi,

The stall error is problably caused by a hanging tape, or due to loosing magnetic coating from the mylar carrier.
Check your tape for blank spots wher the coating is removed.
This is a problem for a lot of original HP tapes, #M tapes lasts longer.

-Rik

#3

I am using some new tapes I got from Athana. They are supposed to be direct replacements for the original. There seems to be a bit of drag when I move the drive wheel with a finger.

Which 3M tape do you have in mind? Is it the DC1000?



Possibly Related Threads…
Thread Author Replies Views Last Post
  Need service information for HP 82161A Cassette Drive Peter N1 2 1,341 07-14-2013, 04:11 AM
Last Post: Tony Duell
  HP 9885M disk drive David Ramsey 0 967 05-12-2013, 09:38 PM
Last Post: David Ramsey
  HP85 tape reader; end of tape detection inaki 9 3,084 04-25-2013, 02:25 PM
Last Post: Paul Berger (Canada)
  9114A Drive aj04062 4 2,199 11-17-2012, 07:48 PM
Last Post: Raymond Del Tondo
  HP 85 Tape. robertoataulfo 1 1,096 05-03-2012, 06:32 PM
Last Post: Katie Wasserman
  200LX -- can't seem to access A: drive Glenn Becker 6 2,391 04-09-2012, 12:23 PM
Last Post: Glenn Becker
  Interesting find: HP 9875A dual cassette drive David Ramsey 16 3,803 11-03-2011, 06:59 PM
Last Post: Eric Smith
  9830 tape drive question David Ramsey 6 1,692 08-20-2011, 04:39 AM
Last Post: Tony Duell
  82161A Tape Drive - O-Ring Question Ángel Martin 4 1,430 06-18-2011, 08:39 AM
Last Post: Ángel Martin
  HP 9114 disk drive battery charging David Ramsey 8 2,349 05-25-2011, 12:15 AM
Last Post: David Ramsey

Forum Jump: