Aloha!
Does somebody know how to make the HP-95LX use config.sys autoexec.bat files, that I created?
At execution of command.com they have no effect...
Thanks!
Johnny
HP-95LX config.sys & autoexec.bat
|
02-26-2002, 08:56 AM
Aloha!
Thanks!
02-27-2002, 01:03 PM
I may be wrong, but i thought these files are rom files and cannot be modified. Otherwise if you corrupt these files the 95LX won't start... for ever ! Cheers,
02-27-2002, 03:53 PM
Well - I think you _are_ wrong. Theese files are not to be found anywhere in either ROM or RAM.
Thanks,
02-27-2002, 06:58 PM
this is so speculative, that i don't consider it advice ;-). i have both a 100LX and 200LX. they have options on reboot (using ctrl-alt-del) that allow one to pick the boot device (A:, C:, D:, etc.) for using various configs. make sure you're not booting off a ROM only drive...point to the one with your files. good luck.
02-28-2002, 11:01 PM
It's been awhile since I've done this, so this is just
As I recall, it was best to create these on drive A: if you
Of course when you had these files in place, you had to give
You also had to specify the "*.EXM" files in the startup
There used to be an ftp site with all this information Anyone else with more information? Cheers.
02-28-2002, 11:34 PM
I dug out my old 95 and manual (doesn't get alot of use
There is a third file specific to HP used in booting, which
Anyway, you should be able to reboot it with Ctrl-Alt-Del Cheers |
« Next Oldest | Next Newest »
|