Posts: 3
Threads: 2
Joined: Jan 1970
I am a retired EE. I purchased my HP 49SX in 1993. After I retired in 2K I only used it to balance my checking account. But a few years ago I started doing that on-line and the calculator sat unused on top of my VCR.
A few months ago I got it out to do some math that I dould not do with the Windows calculator. When I tried to turn it on I got no display. I figures it was the batteries so I put new ones in and it still did not work.
Today in reading the manual it says the if you don;r get a display when you turn it on to hod the ON button down while repeatedly pressin the "+" key.
I tried this for an extended period. No sign of life in the display.
Do these LCD displays have a failure mode due to age or non-use?
Bob Macklin
Seattle, Wa.
Posts: 562
Threads: 27
Joined: Oct 2006
the 48sx has a pretty high failure rate on the LCD. You can also try a soft reset by pressing ON+A+F at the same time, or by inserting a paperclip into the reset hole under the top left foot. If you do get it to come on ( or not, I suppose) you can also try pressing firmly with your thumb above the B and C keys while toggling power this applies extra pressure to the LCD display connector. Others?
Posts: 1,092
Threads: 57
Joined: May 2007
Quote:
I am a retired EE. I purchased my HP 49SX in 1993. After I retired in 2K I only used it to balance my checking account. But a few years ago I started doing that on-line and the calculator sat unused on top of my VCR.
That might be the cause of the failure.
The top of a VCR get get fairly warm.
Sit a calculator there for several years and it's probably not going to like it too much.
Dave.
Posts: 3
Threads: 2
Joined: Jan 1970
The LCD is not dead! Pressing above the B & C keys while pressing th power button made it come to life! But I have to press ther to turn it off also. It seems that any operation involving the "ON" button requires the pressure above the B & C keys.
Once on it seems to function normally. Since I have not used it in many years I now will have to get reaquited with it!
Thanks for the clue!
Bob Macklin
Seattle, Wa.
Posts: 887
Threads: 9
Joined: Jul 2007
Heat and humidity (especially the combination) kill LCDs, but not particularly by making them just plain quit, but rather by darkening the background slowly until it's useless. UV isn't good for them either. I had a cheapie LCD clock stuck on the dashboard of a car (where it was always shaded) for 12 years though, and in spite of all the heat, it remained fine.