HP 65 - top row of keys not working

Just acquired a HP 65. Unfortunately the top row of keys (i.e. A - E) is not registering. All other keys are working. I opened it, but didn't find any obvious problems such as corrosion. Any ideas?



Look at the connection betwen logic PCB and Keyboard/display PCB, pin number 11 looking from the right side of the calculator up side down. Perhaps you could find some sign of corrosion or the pin could be broken.

I hope this could help you.




Thanks for your suggestion. I'll try to clean it with isopropanol next week. However, optically all the pins look very nice. No corrosion, no bending, nothing.

Regards, Frank.


Individual keys that stop working can often be remedied by cleaning the contacts as described in this post. While fairly unlikley (I suppose, I am not a statistician) for five keys in the same row to suffer the same problem at the same time, it might be worth a try.

Possibly Related Threads…
Thread Author Replies Views Last Post
  Broken keys on HP Prime? Tarcisi C 0 1,411 12-10-2013, 05:59 PM
Last Post: Tarcisi C
  HP 50g switching two keys in the user keyboard Sean Freeman 9 3,805 12-05-2013, 11:44 AM
Last Post: Mark Puscas
  HP Prime: How do I insert/delete a column/row in a spreadsheet ? Michael de Estrada 3 2,208 11-20-2013, 10:01 PM
Last Post: Michael de Estrada
  HP Prime Save Power Turn Off Not Working Timothy Roche 12 4,023 10-27-2013, 01:41 PM
Last Post: Michael de Estrada
  HP-65 short circuit Ignacio Sánchez 2 1,489 10-22-2013, 08:27 AM
Last Post: Ignacio Sánchez Reig
  [HP-Prime] off-center [0], ... [9] num keys CompSystems 1 1,215 10-18-2013, 10:44 PM
Last Post: Han
  HP Prime - Home and CAS keys BruceH 0 919 10-15-2013, 07:19 PM
Last Post: BruceH
  Temporary User Mode Key Programs not working in RPN BruceTTT 7 2,584 10-14-2013, 01:46 PM
Last Post: BruceTTT
  HP-65 Video Tapes - Anyone have a Copy? Bill (Smithville, NJ) 3 1,721 10-09-2013, 07:40 PM
Last Post: Paul Berger (Canada)
  Using your HP-65 as a clock! Don Shepherd 24 6,065 10-08-2013, 11:53 AM
Last Post: Don Shepherd

Forum Jump: