50G, Plot-Table-Printing to 82240 IR printer
#1

Is it possible to print the table that you generate by pressing

[white shift] *hold* [F6]

more or less directly to an 82240 IR printer without writing a program for the calculation of X's an Y's? I was hoping for a similar way as printing the plot itself: PICT it and PR1 printing from the stack...

#2

On comp.sys.hp48 screen printing via [ON]*hold*[up arrow] was suggested. Any other ideas? I was hoping for a more configurable way...

BTW, the table is not stored in a matrix, is it?

#3

Hi George - as a 'rough and ready' way, [ON]*hold*[up arrow] does work (I've just tried it with my Hp50g and 82240B IR printer). If you want a programmable command, have you tried PRLCD (available through [CAT])? It works for me - there is a bit for info' in the Hp49 AUR.

Hope this helps!!

(p.s. make sure Flag 34 is set to 'Print via IR'!!)

#4

Thanks Graham! That is the way to screen print that was already suggested on comp.sys.hp48.

Maybe I was not specific enough: in general I know how to print with my 50G (or 48G, 42S) 82240A/B combo. My problem is: can I use the value table that is generated for the plot by pressing and holding [white shift] [F6] for printing other than via screen shot? Is there an internal variable matrix filled with the x's and y's that I could print out, something like XVALMAT and YVALMAT? If so, how do I access this?

My studying the AUR and every other bit of information I have available tells me I can not :-(

#5

I would guess that the table is dynamic and not a fixed number of values. How would it know how far to fill? and how would the calculator know how many values to send to the printer? Definitely sounds like a task for a program.

#6

Chuck,

I guess you're right. It was just a nice day dream: a hidden command that would take the lower and upper x-limits from stack...

Well, a program for that task is not that hard to do...



Possibly Related Threads…
Thread Author Replies Views Last Post
  HP Prime touch periodic table : new version Mic 4 1,968 11-25-2013, 05:29 PM
Last Post: Terje Vallestad
  Touch periodic table on HP Prime - revisited Terje Vallestad 2 1,385 11-23-2013, 11:47 AM
Last Post: Mic
  Help: HP-41CX and IR module Marcel Samek 13 3,928 11-14-2013, 11:00 AM
Last Post: Marcel Samek
  IR printer failure Andrew Nikitin 7 2,417 11-05-2013, 11:25 AM
Last Post: Andrew Nikitin
  HP PRIME -- How to plot a phase Bode plot ? dg1969 0 922 11-02-2013, 03:22 PM
Last Post: dg1969
  Touch periodic table on HP Prime Mic 30 8,690 10-27-2013, 04:45 AM
Last Post: Les Koller
  Printing the HP Prime manual BobVA 3 1,735 10-25-2013, 09:53 PM
Last Post: BobVA
  Periodic table for HP Prime Mic 15 4,404 10-19-2013, 12:20 PM
Last Post: Joseph Ec
  3D printing custom molds Han 3 1,634 08-02-2013, 03:26 AM
Last Post: Bruce Larrabee
  HP41 Functions Address Table (F.A.T.) Antoine M. Couëtte 6 2,142 07-21-2013, 02:48 AM
Last Post: Antoine M. Couëtte

Forum Jump: