Posts: 17
Threads: 8
Joined: Dec 2007
I've only recently started collecting HP calculators, but now appear to have: 12C (USA), 15C, 16C, 49G+, 35s, 97 and 12C Platinum. Hmmm, I am a "calcoholic" aren't I?
Anyway, the reason that I got the 49G+ was that at the time, it was the most expensive and most feature rich of the range. I would assume that this mantle has passed to the 50 now?
However, all of the other models I own offer keystroke programming, but as far as I can make out, the 49G+ doesn't. This coupled with the rubbish manual (I've bought other books to supplement it) and its endless functionality has actually left me with a calculator which is almost intimidating to use.
So, I've gone and bought the 35s, as it does offer keystroke programming and seems easier to get the hang of. Part of me has that uneasy feeling of having bought something that I don't really need (the 12C Platinum falls into the same category there for me).
Does this ring true with anyone else? I guess I could make the 49G+ do anything that I need it to, but having to create RPL programs seems more difficult than the more "macro-like" keystroke method of the 35s.
Also the quality of the old 12C that I have seems far better than the modern 12C Platinum, but I figured I'd be less worried about carrying this one with me, as if it gets broken/lost/stolen I can easily replace it.
This post seems a little pointless, but I was wondering if anyone else has similar thoughts?
Nick
Posts: 4,587
Threads: 105
Joined: Jul 2005
Nick, you may find this topic covered many times if you scan the archives. The RPL/RPN-debate seems to be as old as this forum.
HTH, Walter
Posts: 875
Threads: 37
Joined: Jul 2005
Quote:
Hmmm, I am a "calcoholic" aren't I?
Hmmm, I count (only) seven calculators. Practically a teetotaler as far as collectors go.
Quote:
..the reason that I got the 49G+ was that at the time, it was the most expensive and most feature rich of the range. I would assume that this mantle has passed to the 50 now?
The 49g+ and the 50g run the same ROM and have identical calculational capabilities when doing so. The 50g has a serial output port, which a few users need, and uses four batteries instead of three, which seems to offer no advantages. Most people (myself included) find the 50g to be better looking.
Quote:
...its endless functionality has actually left me with a calculator which is almost intimidating to use.
There are those that find the 50g and its RPL siblings a breeze to use. Many others express sentiments similar to yours.
Quote:
Does this ring true with anyone else?
Yes.
Quote:
This post seems a little pointless...
It's as "pointful" as many other things discussed here. As Walter stated, RPN vs. RPL has been the subject of much lively discussion over the years.
Posts: 1,392
Threads: 142
Joined: Jun 2007
Nick, like you, I love the 12c for its simplicity of programming, elegance of design, and availability! It's amazing what you can accomplish with keystroke programming on the 12c. Heck, Valentin even figured out how to play games like bridge-it and solve polynomial equations.
I've taken a liking to the 17bii+ in the last year as well. While it does not offer keystroke programming, its solver lets you, effectively, program it to do the same kind of things you can do with keystroke programming on the 12c.
Posts: 515
Threads: 41
Joined: Feb 2006
I have the 50G and I am still learning to use most of its functions. I have the 48's since they were introduced so user RPL programming isn't a problem. The problem is that I can't seem to find a good program to write program on the PC. Writing program on the calculator itself is a pain.
Posts: 335
Threads: 12
Joined: Dec 2007
Try HPUserEdit. The programmer's page is now
here.
Edited: 10 Jan 2008, 3:32 p.m.
Posts: 255
Threads: 59
Joined: Jul 2007
I downloaded and installed this on my XP machine last night. Even though I selected English during the install, all the words in the I/F came out in Spanish. I ended up removing the program. Has anyone else had this problem?
Gerry
Posts: 222
Threads: 21
Joined: Oct 2006
Gerry,
I downloaded and installed v. 5.3.1.842 tonight from the Programmer's webpage as v. 4 did not work on my XP machine for some reason. Although the I/F was initially all in Spanish, all I had to do was go to the Options menu (Opciones - second last menu from the right) and choose Idiomas -> English. That should do it for you!
Jeff Kearns
Posts: 1,248
Threads: 33
Joined: Aug 2007
I am a recent new user of the 48sx. I find it very difficult to use, slow, very complex, and "unintuitive", if you will. I have to get out the manual for practically everything I try to do with it.
Still, I keep plugging at it, because I am intrigued by the promise of calculating power that it offers.
I consider it more of a handheld computer than a calculator. But it is a lot harder to use than either my Pioneers or a Windows laptop computer.
Posts: 1,619
Threads: 147
Joined: May 2006
Quote:
Still, I keep plugging at it, because I am intrigued by the promise of calculating power that it offers.
Keep plugging away at it. The manuals are very good. I think you could master it over a quiet weekend.
Two distinct advantages with the 48/49/50 series is I/O and emulators. You may find that if you start to use x48 or EMU48 to emulate the 48SX on your desktop you may learn it faster. The I/O will allow you to sync up the two.
Posts: 556
Threads: 9
Joined: Jul 2007
Quote:
I find it very difficult to use, slow, very complex, and "unintuitive", if you will
this is called steep learning curve, so should one expect from such powerful device, once you master it though it pays for the efforts so, keep going ;)
Posts: 28
Threads: 6
Joined: Dec 2007
I noticed that the 50g includes a solver for non-linear systems.
I am not aware that the 49g has this (PLEASE point it out if anyone is aware of it, as my 50g is now out of commission).
EL
Posts: 1,248
Threads: 33
Joined: Aug 2007
Egan and Reth, thanks for the encouragement. Vindication that my perseverance may indeed be worth it.
Posts: 119
Threads: 18
Joined: Feb 2007
Quote:
this is called steep learning curve, so should one expect from such powerful device, once you master it though it pays for the efforts so, keep going ;)
Technically, this is called a shallow learning curve. With a learning curve, the x-axis is time, and the y-axis is progress. If the learning curve is steep, that's a good thing, because it means you get up to speed in a short amount of time.
(People mis-use this term all the time, and while I hate to look like a pedantic git making a semantic quibble, I figured that people might find this interesting since this forum is pretty geeky.)
Cheers,
-cam
Posts: 3,283
Threads: 104
Joined: Jul 2005
Quote:
Technically, this is called a shallow learning curve.
If you see it from the perspective of the person who has mastered it, you are right. Slow progress but still progress.
If you look at it from a perspective of someone who has yet to go uphill, the amount of info to digest looks rather steep.
:-)
Posts: 875
Threads: 37
Joined: Jul 2005
I am not an expert on the use and functionality of the 49g, 49g+ or 50g calculators. According to this thread at comp.sys.hp48, it is possible to load ROM version 2.09 for the 49g+ and 50g into a 49g. So if the functionality you want is available in that ROM version for the 50g, it should be possible to get it on a 49g.
Posts: 273
Threads: 31
Joined: Jul 2005
Quote:
Gerry,
I downloaded and installed v. 5.3.1.842 tonight from the Programmer's webpage as v. 4 did not work on my XP machine for some reason. Although the I/F was initially all in Spanish, all I had to do was go to the Options menu (Opciones - second last menu from the right) and choose Idiomas -> English. That should do it for you!
Jeff Kearns
Slightly OT, but just to let you know, the English language file is incomplete in the latest version. I've done a translation for the last few versions, and just gave the author my latest. Others have done translations too, hence you see a couple of options when you change languages. Hopefully, he'll add mine in soon. In the meantime, feel free to contact me through the forum, and I'll send you the latest language file. And if you see any errors, please let me know.
|