HP 32Sii Troubleshooting - Does not turn ON
#1

I've had my 32Sii for nearly 10 years now, and it has worked without fail until just a few days ago.

when I pressed the ON button the screen was very dim. I tried to adjust the contrast,I put in a set of fresh batteries, tinkered with it, all to no avail.

Anyways, I found a simple fix to the problem. I used a fine grit sandpaper to scour the battery terminals. the terminals looked clean, and shiny so I did not think it would actually work, but miracle, my trusted HP32Sii came back to life.

Hope this will help somebody with a similar problem.

#2

Quote:
Hope this will help somebody with a similar problem.

It did.

I warmly thank you, my HP 22S wasn't working anymore until I used a rubber to clean the battery terminals.

It turned out to be working perfectly afterwards!



Possibly Related Threads…
Thread Author Replies Views Last Post
  HP-41CL setup troubleshooting Xavier A. (Brazil) 2 1,909 12-02-2013, 06:29 AM
Last Post: Xavier A. (Brazil)
  HP Prime Save Power Turn Off Not Working Timothy Roche 12 4,249 10-27-2013, 01:41 PM
Last Post: Michael de Estrada
  HP-97 Printer Troubleshooting aj04062 6 2,570 10-15-2013, 08:45 PM
Last Post: Eric Smith
  HP Prime: Slow turn off Paul D. Fox 1 1,268 10-09-2013, 08:39 PM
Last Post: Tim Wessman
  HP 32sii Fault Carlos Estinos 9 2,904 09-26-2013, 01:06 PM
Last Post: Csaba Tizedes (Hungary)
  HP 32sII with faulty keypad aurelio 6 2,613 09-21-2012, 05:08 PM
Last Post: aurelio
  Can't turn on HP 15C Laci 4 1,762 03-23-2012, 03:54 PM
Last Post: uhmgawa
  HP 32sII Integration Error of Standard Normal Curve Anthony (USA) 4 1,691 03-14-2012, 03:18 AM
Last Post: Nick_S
  41CL - Shut Off that Auto-Turn Off Frido Bohn 17 4,483 12-22-2011, 03:39 AM
Last Post: Frido Bohn
  12c won't turn on --- options? Gene Wright 8 2,325 10-28-2011, 10:45 PM
Last Post: gene wright

Forum Jump: