HP-41C and HP-41CX

I have purchased and am in the assembly process of a MLDL2000, Thank you Meindert. I have noticed that with the HP-41CX Halfnut and Fullnut I get intermittent results when using the MLDL2000. Ususally the HP-41CX will, when a CAT 2 is done, drop into neverland when it gets to the M2K ROM and then the display goes blank for a while and then returns to finish the CAT 2.Usually the listing in the CAT 2 is gibberish when trying to display the M2K ROM. Now with the HP-41C Halfnut tall key version, everything runs awesome with the MLDL2000 connected. Run a CAT 2 and everything is good. Is there a difference with the way the CX versions connect with modules vs the C? I am confident this is not an MLDL2000 problem because it works on the 41C. Is the "zebra" connector slightly thinner or different from the CX? Is the case tighter on the C vs the CX?
Has anyone had a similar problem before?



there are various differences between the C and the CX.

The Catalog function of the CX has been slightly changed,

so CAT 2 will display module headers only by default.

This way the user can get an overview of the installed ROMs,

and only view the details of the wanted ROM.

Please also check the CX manual about this feature.

I didn't check the M2K ROM in particular,

but defective Catalog displays are usually

an indicator of either a bad FAT,

or a special character in a function name.

The M2K ROM intercepts key sequences at specific occasions,

but Meindert should be able to tell you more about it;-)

About the zebra connectors:

There were different fashions of these connectors,

I know of at least three completely different constructions.

The pink rubber type ones may cause problems over time because they will shrink,

and the metall ring type connectors are sensible against corrosion.

Note that the CX halfnut doesn't have these connectors,

since the hardware layout is completely different to the non-halfnut calcs.



Possibly Related Threads…
Thread Author Replies Views Last Post
  Help: HP-41CX and IR module Marcel Samek 13 4,040 11-14-2013, 11:00 AM
Last Post: Marcel Samek
  HP-41c display problem Ignacio Sánchez 6 2,378 09-04-2013, 10:52 AM
Last Post: Ignacio Sánchez Reig
  HP-41C flakiness John Richards 21 5,361 04-15-2013, 08:18 PM
Last Post: W_Max
  HP-41C Transition to HP-28C book? Dan Grelinger 6 2,188 03-30-2013, 10:32 AM
Last Post: David Hayden
  HP 41CX Survey Pac Keith Burr 7 2,605 03-29-2013, 10:09 AM
Last Post: Keith Burr
  Simple sample programs for the HP-41CX? Tom Lewis 5 2,052 03-25-2013, 07:11 PM
Last Post: Allen
  HP-41C Trivia Question Dan Grelinger 12 2,994 03-12-2013, 09:57 AM
Last Post: Dan Grelinger
  HP-41C Overlay Generator (by spb) aurelio 0 940 03-06-2013, 07:49 AM
Last Post: aurelio
  HP 41c with white trim instead of yellow Jose Gonzalez Divasson 2 1,220 02-01-2013, 07:47 PM
Last Post: Massimo Gnerucci (Italy)
  HP-41C Custom Survey Module Identificaiton Help Dan Grelinger 0 933 01-27-2013, 01:51 PM
Last Post: Dan Grelinger

Forum Jump: