HHC2007 HP Handheld Conf 9/29-30 in San Diego

It's finally time to announce the HHC2007 U.S. HP Handhelds Conference, to be held in San Diego, California on September 29th and 30th. The event is scheduled to be held at the HP facility there, where the majority of the Calculator team is located. One of the themes of this year's affair is "The 35th Anniversary of the HP35" and we are asking those attendees who own HP35s to bring them along as a show of support for three and a half decades of Hewlett-Packard Calculator development.

For all the details on conference registration, recommended hotel location, speaker signups, etc. check out http://holyjoe.net/hhc2007/ on the web. There will be updates posted on a regular basis, so check back at the website for attendee and speaker lists as they become available, as well as links to any HP Handheld-related news that is relevant. As all the other times, going back to the original PPC Conference at the HP Santa Clara office in 1979, it should be an interesting weekend.

Hoping to see you in San Diego in September,

Jake Schwartz


Is there corresponding information to be had about the UK conference two weeks later?



I believe that the HPCC Group may be preparing something for their website at http://www.hpcc.org, however I don't know when it will appear.



I'd say "I'll be there with bells on" except for two things. First, it rarely snows in San Diego in any season, let alone Fall, and second, to be topical I'd have to say "I'll be there with beepers on!"



Thanks, Jake.

I'll make plans to be there, and hope to tie in a family visit, as well.

I'll bring my gift HP-35, my 2004 HP-33S with one bug that ought to be fixed with subsequent releases, and an HP-32SII for comparison.

-- KS


That will help us keep track of who plans to come.

Be good to see you Karl!


Too bad that it is after the school year begins...I'm pretty busy after that.




Thank you for the information!!! I will be there. I have my airline ticket! I will have to leave Saturday night because my step-son is getting married on Sunday. However, I figured spending at least the most part of Saturday on this very special occasion, will be a minimum for me.



While I cannot attend due to prior commitments, I have a few items, (that I think are probably on the minds of others, as well). I used to be active in the PPC back in the 1980s, and have many fond memories of the club, its activities, and the Journal.

I am involved in University activities now, and wish that HP would return to the position that it had decades ago as preeminent in the HHC field. It is noteworthy to me that college texts refer to TI machines, and many professors don't even know how to use RPN machines. Yet, in the past year alone, my discussions of the benefits of RPN have led several Engineering and Physical Science students to borrow one of my calculators and eventually purchase their own. Two of them were outspoken critics of the idea that RPN could be worth considering in light of TI's dominance in the field of education and the fact that TI machines are used extensively in grades below college. One of their comments, prior to actually testing an RPN machine, was that RPN was too difficult for beginners to learn. My own experience contradicts this belief, and their opinion on the subject changed, too, once they had tried RPN.

I don't know where the future of HHCs is headed, but the need for them appears to be still strong. Education should be about providing our students with the most efficient tools and methods to acquire knowledge and to explore the scientific world. I think that HP HHCs have been the best tool for the job until the recent past. Though I still will not use anything but an HP, I opine that HP has lost the edge.

HP should give serious thought to making inroads in the lower educational circles, to getting their products showcased at universities and high schools, and to getting the benefits of RPN into texts.

WRT the latest offering at the high end, the HP 50g can benefit greatly from an upgraded display (more resolution), increased data entry history, and a host of other features that have been mentioned here. I hope that HP will have folks at the conference who will take the suggestions of attendees seriously.

I recall a number of years ago when I was working at a nuclear facility. I used an HP HHC extensively in my work, and was well-known at the site for my opinions about the benefits of RPN in general and HP's quality in particular.

On one occasion, I was working on reactivity calculations with another engineer who was critical of the "weird-ness" of RPN. The small group of engineers present suggested an impromptu face-off using the calculations at hand. The HP 15C was a clear winner, and, as a result, one of the Ph. D.s switched to HP within a few months (after asking me to demonstrate further capability that the 15C had that the current TI devices did not).

On another occasion, I had moved up to a new machine, and that new product had keyboard problems (sound familiar, HP 49 users?). I had been used to entering my data and being confident that the result would be correct. When I discovered that this was not the case, I called HP, //who assigned a field engineer to handle my problem// because they were concerned about their reputation in the nuclear field. I eventually wound up with a new device in the same series that did not have the problem (which I still have). Can you imagine this in today's HP climate?

I look forward to hearing about the conference and to seeing the direction that HP chooses for the future. We don't need a rah-rah nostalgic look at the past as much as we need dedication to quality and excellence in the future.


Possibly Related Threads…
Thread Author Replies Views Last Post
  HP charger 82002c for handheld calculators Dave Burson 2 1,558 05-19-2013, 12:51 PM
Last Post: Dave Burson
  HP12C Limited Edition 30 anniversary keyboard Revan Ng 0 918 01-11-2013, 12:49 AM
Last Post: Revan Ng
  An old friend powered up after 30 years !! Peter Charter (Durban) 19 4,649 10-22-2012, 01:36 PM
Last Post: Dave Shaffer (Arizona)
  THANKS to Diego Diaz aurelio 6 2,126 05-31-2012, 12:36 AM
Last Post: Diego Diaz
  16 out of 30. Well, we're half way there Matt Agajanian 2 1,065 04-14-2012, 04:55 PM
Last Post: Matt Agajanian
  riddle in the spirit of Feb. 29 Don Shepherd 19 4,565 03-01-2012, 06:05 PM
Last Post: Don Shepherd
  HP 30-B size Question Jeff 1 957 01-30-2012, 07:46 PM
Last Post: Mike Morrow
  Ride or Room Sharing to San Diego for HHC2011 Jim Horn 0 821 09-18-2011, 04:53 PM
Last Post: Jim Horn
  12c Users Invited to Join HP and Dennis Harms for Dinner tonight in San Francisco Laura (San Diego) 3 1,339 09-02-2011, 09:06 AM
Last Post: Jake Schwartz
  Message to Diego Diaz about HP 41 flex PCB Alexander Oestert 0 839 08-02-2011, 08:57 AM
Last Post: Alexander Oestert

Forum Jump: