Anyone have the pinout for a Thinkjet 2225P (parallel) printer cable? It
is not a standard Centronics, it has a 15 pin D connector at the printer
(male). Thanks all.
Wilhelm Loidl
HP 2225P with DB15 connector pinout needed
|
12-29-2006, 03:24 AM
Anyone have the pinout for a Thinkjet 2225P (parallel) printer cable? It Wilhelm Loidl
12-29-2006, 05:19 PM
A while back, I found a posting from Tony Duell that seemed promising. I haven't tried it yet... I would like to know if it works.
Quote:
12-29-2006, 05:37 PM
I should add that I have great respect for Tony's knowledge and his many contributions; the only reason I think it may not work as-described is Tony's own lack of confidence re pins 12 & 13.
12-30-2006, 03:08 AM
Thank you for the information! I'll try the connection and inform you as soon as possible. Best wishes to all forum-members for 2007! Wilhelm Loidl
12-30-2006, 05:01 AM
I can assure you that pinout works (I have used a 2225P with that cable). I can't remember what pins 12 and 13 are (some kind of error indicators?), they're not really needed for normal operation, hence my uncertainty The diagram is how I wired my cable, but looking at it later I thought it looked more 'logical' (i.e. the pins that are used are in the same order at each end of the cable) if you swapped them round.
12-30-2006, 10:51 AM
Hello again - the working assignment: PC -------------- TJ 1 -----Stb-----> 1 2 -----D0------> 2 3 -----D1------> 3 4 -----D2------> 4 5 -----D3------> 5 6 -----D4------> 6 7 -----D5------> 7 8 -----D6------> 8 9 -----D7------> 9 10 <---Ack------ 10 11 <---Busy----- 11 13 <---Sel------ 12 15 <---Err------ 13 16 ----Init----> 14 12,19 -- Gnd --- 15
Thank you all for helping me very smart and fast Wilhelm Loidl |
« Next Oldest | Next Newest »
|