HP Forums
Scratches on aluminum bezel - Printable Version

+- HP Forums (https://archived.hpcalc.org/museumforum)
+-- Forum: HP Museum Forums (https://archived.hpcalc.org/museumforum/forum-1.html)
+--- Forum: Old HP Forum Archives (https://archived.hpcalc.org/museumforum/forum-2.html)
+--- Thread: Scratches on aluminum bezel (/thread-90681.html)



Scratches on aluminum bezel - Mike Bremerman - 04-06-2006

Just purchased an old 15C from eBay and the unit has some abrasions (fine horizontal scratches) on the aluminum bezel. Is there a polish anyone would recommend that might work to remove / buff out and restore the shine to bezel? I know there are hundreds of cleaners/polishes out there to choose from... thought someone might have tried this before and had success with a particular brand. I don't want to degrade the finish any further by experimenting. Thanks


Re: Scratches on aluminum bezel - Andy Morales - 04-06-2006

Mike,

I had a 11C that was heavily scratched and marred. I carefully taped up the display and plastic surfaces and used ultra fine steel wool and was able to polish out the scratches with alum wheel car polish. I sold the unit last year on e-bay. It came out quite nice. Use magic tape or electrical tape and carefully mask off plastic and display.

Good luck, use tender loving care and patience. The bezel is easily damaged.

Regards,

Andy


Re: Scratches on aluminum bezel - Ronald - 04-08-2006

Hello Andy,

I did a thing like that on a 11C, but there was also a transparant varnish (paint) on the Bezel. Did you repaited it ?. If yes how, with what ?

Thanks

Ronald


Re: Scratches on aluminum bezel - Andy - 04-09-2006

Ronald,

I did not repaint it. I left it with a sort of yellowish hue, almost gold. I had to use the steel wool over ALL the alum surfaces to even it out.

Regards,

Andy