Wiring for HPILCOM = HP41 / PC Interfacing - Printable Version +- HP Forums (https://archived.hpcalc.org/museumforum) +-- Forum: HP Museum Forums (https://archived.hpcalc.org/museumforum/forum-1.html) +--- Forum: Old HP Forum Archives (https://archived.hpcalc.org/museumforum/forum-2.html) +--- Thread: Wiring for HPILCOM = HP41 / PC Interfacing (/thread-85284.html) |
Wiring for HPILCOM = HP41 / PC Interfacing - Christoph Klug - 01-06-2006 Dear HP41 & PC enthusiasts : For using HPILCOM from Hans Brüggemann I need the correct wiring between the 9pin COM1 interface connector of the PC and the 25pin interface connector of the HP-IL/RS232 interface Box. Please give additional informations about the needed COM1 mode : Hardware interfacing or software interfacing ? Waiting for your help :-) Christoph Klug
Re: Wiring for HPILCOM = HP41 / PC Interfacing - Hans Brueggemann - 01-06-2006 christoph, set the COM1 (or, COM2, if you want) to the following mode : 9600 baud, 8 bits, 1 stopbit, no parity and sw flowcontrol. for the cabling, use a simple 25pin male to 9pin female cable. make sure, that your 82164 is in standard DTE configuration. the 9 pin serial connector on the pc has the following pin-out: 1(in)DCD, 2(in)RXD, 3(out)TXD, 4(out)DTR, 5GND, 6(in)DSR, 7(out)RTS, 8(in)CTS, 9(in)RING. hope, that helps! hans
Re: Wiring for HPILCOM = HP41 / PC Interfacing - Gonzalo Fernandez (Spain) - 01-06-2006 Hello: Do you know where I can find the HPILCOM program?
gonzalo
Re: Wiring for HPILCOM = HP41 / PC Interfacing - Etienne Victoria - 01-06-2006 Hello Hans, I would also be very happy to receive your HPILCOM solution! If you don't mind, could you please email it to Etienne.victoriaREMOVEGARBAGE@orange.fr Many thanks and happy new year from France!
Etienne
Re: Wiring for HPILCOM = HP41 / PC Interfacing - Gonzalo Fernandez (Spain) - 01-06-2006 Hello Hans: I would be grateful if you can send the HPILCOM program to gonzalo_fernandezNOSPAM@apb.es
thanks
Re: Wiring for HPILCOM = HP41 / PC Interfacing - PeterP - 01-06-2006 Hello Hans, Can I add my name to the growing list of people begging for your pgm? You can reach me at ppl4world NOSPAM at NOSPAM yahoo I can understand if you do not want to, yet maybe you would consider adding it to TOS, in case you are willing to share it openly... Cheers
Peter
|