41CV Batt Pack - Printable Version +- HP Forums (https://archived.hpcalc.org/museumforum) +-- Forum: HP Museum Forums (https://archived.hpcalc.org/museumforum/forum-1.html) +--- Forum: Old HP Forum Archives (https://archived.hpcalc.org/museumforum/forum-2.html) +--- Thread: 41CV Batt Pack (/thread-7981.html) |
41CV Batt Pack - Rene Beltran - 02-09-2001 I have a 41CV in mint condition, but the battery pack (82120a) is dead! Re: 41CV Batt Pack - Steve (Australia) - 02-09-2001 It's totally dead, not worth a thing, send it to me! Well, maybe not... The cells can be replaced. The original 1/2 N cells are rare as hens teeth, but you can use 1/3 AAA cells. 1/3 AA *almost* fit, but require some truely extrodinary hacking to fit them (I would not advise it). There is a problem with some nicad packs that will pass ummm well in excess of 12V to the calculator if the nicads are stuffed - so be careful trying to run it without the cells replaced. I would suggest you fit the charger to the pack (outside the calculator) and measure the voltage. If it's less than 6V, then the calculator is almost certainly undamaged. If it exceeds 6V by much of a margin, there is a chance that your calculator may be damaged (sorry).
There is a "fix" to this problem that you can do when replacing the cells if your pack is one of these.
Re: 41CV Batt Pack - Dave Hicks - 02-09-2001 If you don't want to fix the rechargeable pack, I think I have a spare disposable holder that I could send to you.
Disposables are good if you're using just the basic calculator and ROM/RAM modules. They can get expensive if you're also powering the card reader or HP-IL.
Re: 41CV Batt Pack - Rene Beltran - 02-09-2001 Dave: Thank you, that's the solution to my problem ! I sent you by e-mail my response. Please let me know if you need more data.
Regards.
Re: 41CV Batt Pack - Dave Hicks - 02-09-2001 Rene, It will ship out tomorrow.
Dave
Re: 41CV Batt Pack - Rene Beltran - 02-17-2001 Dave: Please let me know in which way I can help the Museum. Best Regards.
Rene Beltran
|