Is there anyone writing MCODE for the HP-41? - Printable Version +- HP Forums (https://archived.hpcalc.org/museumforum) +-- Forum: HP Museum Forums (https://archived.hpcalc.org/museumforum/forum-1.html) +--- Forum: Old HP Forum Archives (https://archived.hpcalc.org/museumforum/forum-2.html) +--- Thread: Is there anyone writing MCODE for the HP-41? (/thread-77888.html) |
Is there anyone writing MCODE for the HP-41? - don wallace - 09-08-2005 No text...
Re: Is there anyone writing MCODE for the HP-41? - Doug Wilder - 09-08-2005 Ya, just finished a new 4k disassembler rom, not much in the last two weeks however, been working on my motorcycle. Did the BLDROM over at TOS a few months back. Why?
Doug
Re: Is there anyone writing MCODE for the HP-41? - Jeff - 09-08-2005 I have been having a go at this lately. I now have the NoVram module with the HEPAX and have been trying to write some code. Re: Is there anyone writing MCODE for the HP-41? - don wallace - 09-08-2005 Hi Doug, Jeff. Really cool, Doug... What sort of motorbike do you have? What are you doing on it?
Well Jeff, to be honest I am just curious. I am going to have to write a few simple routines in MCODE to do my IR module and maybe
DW
Re: Is there anyone writing MCODE for the HP-41? - Doug Wilder - 09-08-2005 Hi Don, Aw, it's an old HD. 1931 VL. Did you know that those old machines literally dump oil on the road? It just goes straight through. Have to fill up the "oil" tank (half the gas tank) every 200 miles or so (hand pump it every 5) ... it just goes by the crankshaft one time .. then on the ground. Not gonna pass ANY envionmental test! The gas/oil tanks are a nightmare when they leak: about 30 pieces and all lead soldered together like a radiator. The chromoly frame is brazed together with cast iron at the joints. The springer front end is all cast iron save the springs, but i have told you more than you want to know. Any help i can offer with your MCODE, yet i don't know much about the actual signals on ISA due to any particular function, i'm definately software on the 41 only, too clumsy to handle a soldering iron or an smt.
Best Regards, Re: Is there anyone writing MCODE for the HP-41? - Matthias Wehrli - 09-09-2005 Hi Doug
Just for my database: You programmed the BLDROM? It is a 4k MCode image (with no hardware module).
Matthias
Re: Is there anyone writing MCODE for the HP-41? - don wallace - 09-09-2005 Hi Doug,
Well thanks on the offer of (advice / asisstance with) coding; W.r.t. the 'cycle... well what can I say? You certainly seem to be a gultton for punishment (love hurts...). I have heard the old Harleys (etc.) want to spew their stomach contents a bit... I think old motorcycles are a bit like women: A Great hobby, fun to ride, very lovable but HIGH MAINTAINENCE...(?) It's cool, I won't call the EPA (or FEMA) on ya, buddy! Cheers,
Don W Re:Regarding EPROM - PeterP - 09-11-2005 Jeff, Cheers
Peter
Re:Regarding EPROM - don wallace - 09-11-2005 Hi Peter.
Diego Diaz following on from the work of J.I. has built
I am making these (ROM) modules fully preprogrammed. I can manufacture whatever you want. Feel free to write to me: Don Wallace donwallace63@yahoo.com.au
http://donwallace.customer.netspace.net.au
Re: Is there anyone writing MCODE for the HP-41? - Doug Wilder - 09-12-2005 Hi Matthias,
Yes it is a 4K image. There is a .pdf manual at TOS.
Best Regards, Re:Regarding EPROM - Diego Diaz - 09-12-2005 Hi Don... all, You're right on both... very little time (actually I'm writting this in a few hours gap between flights) and I've renewed production of Clonix & NoVRAM. Please see my last ad: http://www.hpmuseum.org/cgi-sys/cgiwrap/hpmuseum/adforum.cgi?read=14025 Further info at: I'd like to point out that Clonix is supplied with customer selected configuration which, of course, can be re-configured at will. Sorry for the lack of time... will be back in a couple of weeks. In the meantime, keep the 41 spirit alive!! ;-)) Regards from Spain
Re: Is there anyone writing MCODE for the HP-41? - don wallace - 09-13-2005 Hi Doug. Could you give me a URL for the manual, please? What licence do you have on the software? Would you please write to me, I have a proposal for you... donwallace63@yahoo.com.au
DW
|