HP Forums
belt dimensions for tape drives - Printable Version

+- HP Forums (https://archived.hpcalc.org/museumforum)
+-- Forum: HP Museum Forums (https://archived.hpcalc.org/museumforum/forum-1.html)
+--- Forum: Old HP Forum Archives (https://archived.hpcalc.org/museumforum/forum-2.html)
+--- Thread: belt dimensions for tape drives (/thread-76327.html)



belt dimensions for tape drives - marais - 07-28-2005

Good morning,
I would like to ask if the belt specifications (width) of the various tape drives built into the HP calculators HP-85, 9815 and 9825 can be found somewhere? I'll visit a belt manufacturing company later this year and would like to use the opportunity to get some belts in anticipation. I know that part of the specs concerns the reinforcement cord inside the belt, which can be Kevlar (yellow in color) or polyester (white). I do not know if the HP belts had a reinforcement cord, or if the presence of such a cord would impact the function.

Thank you
Andreas


Re: belt dimensions for tape drives - Vassilis Prevelakis - 07-28-2005

I do not know about the 9815 and 9825, but the HP-85 tape drive does NOT have a belt. The capstan is attached directly to the motor.

I suspect that the HP-9815 and HP-9825 also do not have bands as I do not recall seeing such bands in the spare parts lists for these computers.

Perhaps you are talking about the band inside the tape CARTRIDGES?

**vp


Re: belt dimensions for tape drives - Vassilis Prevelakis - 07-31-2005

I am sorry for the earlier post, I have just come across an image of a tape catridge and the belts are referred to as "tape drive belts" so it was my bad.

Sorry

**vp




Re: belt dimensions for tape drives - marais - 07-31-2005

Looking good! Do you have dimensions at hand?

Andreas