+- HP Forums (https://archived.hpcalc.org/museumforum)
+-- Forum: HP Museum Forums (https://archived.hpcalc.org/museumforum/forum-1.html)
+--- Forum: Old HP Forum Archives (https://archived.hpcalc.org/museumforum/forum-2.html)
+--- Thread: Re: HP-97 printer gear (/thread-74440.html)
Re: HP-97 printer gear - Jürgen Sammler - 06-03-2005
I had the same problem, the middle gear lost it's teeth. It is the one with 30 teeth.
I found one at (made from brass):
GHW Modellbau
Gewerbering 29
D - 41372 Niederkrüchten (Germany)
Tel. 02163-81767 Fax 02163-82670
e-mail: ghw@ghw-modellbau.de
Internet: www.ghw-modellbau.de
Part-No. 753030, 2,65 Euro. Ask for shipping.
The diameter of bore is 2mm, you must fit it to the axis.
Now my HP-97 prints very well.
Re: HP-97 printer gear - Nelson M. Sicuro (Brazil) - 06-03-2005
I need the very same gear for my '97, but I don't speak German. It is possible to send one gear here to Brazil? Can you ask them for the costs?
Thanks!!
Nelson
Re: HP-97 printer gear - Dia C. Tran - 06-05-2005
Can you get me one too?