HP Forums
33s: section properties for rectangular composite bodies - Printable Version

+- HP Forums (https://archived.hpcalc.org/museumforum)
+-- Forum: HP Museum Forums (https://archived.hpcalc.org/museumforum/forum-1.html)
+--- Forum: Old HP Forum Archives (https://archived.hpcalc.org/museumforum/forum-2.html)
+--- Thread: 33s: section properties for rectangular composite bodies (/thread-71250.html)



33s: section properties for rectangular composite bodies - Eric Lundgren - 04-01-2005

If anyone's interested, I've written a program that computes the neutral axis (Ybar) and x-section moment of inertia (Ix)for any build up of n rectangular components (ie. uneven I-beam, sandwich construction).

Inputs are prompted:
N (no. of components)
Prompted for each component:
B (base dimension)
H (height dim)

Outputs to the x and y register:
Y: neutral axis of composite
X: x-sect moment of inertia of composite

It uses two labels (could be done with one, but as it is it works)
I'm sure there's others out there. Happy to share, send an email to erikuma815@yahoo.com
Eric


Re: 33s: section properties for rectangular composite bodies - bill platt - 04-01-2005

Hi Eric,

I have a similar program I wrote for the 11c and on. I would be interested in comparing.

plattdesign.net

Regards,

Bill


Re: 33s: section properties for rectangular composite bodies - Eric Lundgren - 04-01-2005

Hi Bill,

I'll be typing it up tonight, to have a backup in case of a 'memory clear'. Would you like me to email it, or should I post it here?

Eric