+- HP Forums (https://archived.hpcalc.org/museumforum)
+-- Forum: HP Museum Forums (https://archived.hpcalc.org/museumforum/forum-1.html)
+--- Forum: Old HP Forum Archives (https://archived.hpcalc.org/museumforum/forum-2.html)
+--- Thread: ERAMCO SYSTEMS ESCR-RSU-2 SOFT SELECT (/thread-70316.html)
ERAMCO SYSTEMS ESCR-RSU-2 SOFT SELECT - Emmanuel, France - 03-10-2005
Please help ...
I got this item from a friend and I was not able to access its 32K (64K or 128K) RAM.
I used ES-RSU1A & 2A, Zenrom and Rambox but nothing happened?!
The first 8K ROM returned NO RSU PAGE when INIPRGM a page.
It seems to need a special software according to its label.
No switch available outside.
However there's two switches inside with two positions for each.
Thanks for help.
12345
Re: ERAMCO SYSTEMS ESCR-RSU-2 SOFT SELECT - Christoph Klug - 03-11-2005
Dear Emmanuel,
does your RAM-Bos lost the internal operating system ? Or is this available on port E and F ?
Regards - Christoph
Re: ERAMCO SYSTEMS ESCR-RSU-2 SOFT SELECT - Emmanuel - 03-11-2005
There's no OS in the RAMBOX and impossible to write in it ?!
Re: ERAMCO SYSTEMS ESCR-RSU-2 SOFT SELECT - Christoph Klug - 03-11-2005
Dear Emmanuel,
may be your RAM-Box have an hardware failure. Normally - after reasing the pages you are able to load ROM-images to the RAM-Box by using an OS (stored on Zeprom or Clonix)
From which source you get the RAM-Box
Regards - Christoph
Re: ERAMCO SYSTEMS ESCR-RSU-2 SOFT SELECT - Donald1800 - 03-12-2005
As I recall, (and this is going WAY back), the RSU RAM unit required a seperate OS ROM plugin module to function.
Don