+- HP Forums (https://archived.hpcalc.org/museumforum)
+-- Forum: HP Museum Forums (https://archived.hpcalc.org/museumforum/forum-1.html)
+--- Forum: Old HP Forum Archives (https://archived.hpcalc.org/museumforum/forum-2.html)
+--- Thread: HP OmniGo 100 (/thread-68655.html)
HP OmniGo 100 - adam - 02-04-2005
Hello,
I changed both the back up and main batteries of my HP OmniGo 100 and now the unit is not functioning properly. When turned on the screen just displays the OmniGo logo. Does anyone know how to fix my problem??
Thank you,
Adam
amor3y@yahoo.com
Re: HP OmniGo 100 - Raymond Del Tondo - 02-04-2005
Hello,
It could be possible that you changed the batts
while the machine OS wasn't shut down.
You could try a soft reset, or if that doesn't work,
a hard reset using the reset pin hole.
Raymond
Re: HP OmniGo 100 - How do i reset? - adam - 02-04-2005
How do i soft or hard reset??
Re: HP OmniGo 100 - How do i reset? - Raymond Del Tondo - 02-05-2005
Soft Reset: SHIFT+ON+PgDn
System Reset: Immediately after turning on the machine
press and hold the 'C' key for a second.
You'll be asked to initialize the RAM.
Press 'Y' to initiate a Hard Reset,
which erases all data in RAM.
If you press 'N' instead the machine
will try to do a normal restart.
This procedure was taken from the OmniGo 100 user manual;-)
HTH
Raymond
Re: HP OmniGo 100 - Jeff D - 02-05-2005
How can you bypass the GEOS system on this unit and get right down to the DOS shell?
Can anyone help?
Thanks,
Jeff
Re: HP OmniGo 100 - Raymond Del Tondo - 02-05-2005
IIRC, you can edit the config files,
and REM out the loader call.
Then a simple restart should do the job.
Alternatively, there should be kinda DOS-Box
either on the desktop or inside an application.
Raymond