+- HP Forums (https://archived.hpcalc.org/museumforum)
+-- Forum: HP Museum Forums (https://archived.hpcalc.org/museumforum/forum-1.html)
+--- Forum: Old HP Forum Archives (https://archived.hpcalc.org/museumforum/forum-2.html)
+--- Thread: Lex files PC <-> HP75 (/thread-54292.html)
Lex files PC <-> HP75 - Claudio - 03-25-2004
While I'm waiting for my registered copy of Emu41, I wish to transfer a LEX file to my HP75C via the HP82973A interface.
How can I create a LIF file for Trans41 with the LEX file into it?
Thanks
Claudio
(remove the double "_nospam_" for my e-mail address)
1234
Re: Lex files PC <-> HP75 - Raymond Del Tondo - 03-25-2004
Hi,
here in the museum are either articles and/or other forms of descriptions how to deal with LIF media, and how to get files onto and out of the media.
Raymond
Re: Lex files PC <-> HP75 - Claudio - 03-26-2004
I saw them, but I hoped that there was a program that do it automatically.
1234
Re: Lex files PC <-> HP75 - J-F Garnier - 03-26-2004
With your next registered Emu41, it will be very easy: use LIF image file (such as found on this site) in HDRIVE1/2 declaration, and use HP75 functions (CAT, COPY) to access it through Emu41.
Actually, Emu41 with HPIL acts as multiple HPIL devices (display/mass storage units/printer/DOSlink) for ANY HPIL controller (41/71/75).
J-F
Re: Lex files PC <-> HP75 - Claudio - 03-26-2004
Hi Jean, I'm happy to hear your info, but before this I need to transfer a LEX file from my Hard-Disk to the LIF image file.
When the LEX file will be into the LIF image file, I'm sure that I will can transfer it to my HP75 with your program.
Now I must do manually the first step of this transfer, but I'm finding for an automatic system. :-)
However thanks for your suggestion.
Claudio
1234