+- HP Forums (https://archived.hpcalc.org/museumforum)
+-- Forum: HP Museum Forums (https://archived.hpcalc.org/museumforum/forum-1.html)
+--- Forum: Old HP Forum Archives (https://archived.hpcalc.org/museumforum/forum-2.html)
+--- Thread: How to change dots <> commas in HP-32E? (/thread-40126.html)
How to change dots <> commas in HP-32E? - Nelson M. Sicuro (Brazil) - 08-07-2003
Hi, folks!
How to change dots <> commas in HP-32E? I just finished their restoration, and I need to know if was any way to do this. A jumper, maybe?
Thanks
Nelson
Re: How to change dots <> commas in HP-32E? - Raymond Del Tondo - 08-07-2003
I'm not sure, but I remember reading about the dot/comma jumper or bridge in the international version of the 34C.
Please take a look at the technical info for the 34C here in the museum.
Maybe the forum archive could help, too.
Raymond
Re: How to change dots <> commas in HP-32E? - Nelson M. Sicuro (Brazil) - 08-07-2003
Thanks, I'll look (again) there. But I think that there isn't any jumper (I don't found any) inside it. Maybe only the international 34C have it...
If I was crazy enough I might just swap the dot and comma connection on the display! Ahh, what a sin messing up with the flexible PCB... Never mind.
Best regards,
Nelson
Look at what Luiz posted, responding to a question of me - Harry (Germany) - 08-07-2003
Here you find a very good picture of the powersupply of a Spice and the jumper in it that changes dot/comma.
Luiz's Post
Regards, Harry
Re: Look at what Luiz posted, responding to a question of me - Nelson M. Sicuro (Brazil) - 08-08-2003
Thanks, I'll look for it next time I open it.
Regards,
Nelson
I heard my name... - Vieira, Luiz C. (Brazil) - 08-08-2003
Hi, Harry;
thank you mentioning. Just to add that I read it first in one of Katie's post, sometime ago. Please, feel free using the information and the pictures anytime you want. Belongs to us all.
Best regards.
Luiz (Vieira)
Re: Look at what Luiz posted, responding to a question of me - Nelson M. Sicuro (Brazil) - 08-08-2003
I just finished assembling again my 32E. I cutted that jumper, and it is now showing dots as separators and a decimal comma. It worked!
Thanks to all!
Best regards,
Nelson