48GX/SX and 95LX PC I/F cable - Printable Version +- HP Forums (https://archived.hpcalc.org/museumforum) +-- Forum: HP Museum Forums (https://archived.hpcalc.org/museumforum/forum-1.html) +--- Forum: Old HP Forum Archives (https://archived.hpcalc.org/museumforum/forum-2.html) +--- Thread: 48GX/SX and 95LX PC I/F cable (/thread-2809.html) |
48GX/SX and 95LX PC I/F cable - Bruce Riggins - 11-12-1999 Does anyone know if the PC I/F cable for the 95LX is the same one used on the 48 series? Thanks. Bruce
Re: 48GX/SX and 95LX PC I/F cable - Andrés C. Rodríguez (Argentina) - 11-12-1999 If you buy the cable for an LX100 (I assume it is similar in the LX95 case), you also will receive a 4 pin to 10 pin converter (a small plastic píece about 1 cm on each side). This converter allows the cable to be connected to an HP 48 calculator. The other end is a DB-9 connector, for PC use.
Re: 48GX/SX and 95LX PC I/F cable - phillipe - 11-13-1999 www.hpcalc.org ....go to the buying guide section at the bottom for complete info. 100lx cable can fry a 38 (sends 12v), not sure about a 48?? 95lx cable should work though
|