Does Prime Have a Multiple Equation Solver? - Printable Version +- HP Forums (https://archived.hpcalc.org/museumforum) +-- Forum: HP Museum Forums (https://archived.hpcalc.org/museumforum/forum-1.html) +--- Forum: Old HP Forum Archives (https://archived.hpcalc.org/museumforum/forum-2.html) +--- Thread: Does Prime Have a Multiple Equation Solver? (/thread-250628.html) Does Prime Have a Multiple Equation Solver? - Norman Dziedzic - 09-18-2013 I use my 50g a lot with MSOLVR and am wondering if the Prime has a similar functionality? Thanks, Re: Does Prime Have a Multiple Equation Solver? - Eddie W. Shore - 09-19-2013 Yes. The Solve app is updated so it can solve multiple amount of equations. Example in Symb View of the Solve app: E1: 2*A + 3*B = 1 E2: B^2 = 4*A + 3 With E1 and E2 checked, go to Num View and select A and B to be solved for. One solution is: A = -.612486080161 B = .741657386774 Re: Does Prime Have a Multiple Equation Solver? - Norman Dziedzic - 09-20-2013 I only have the emulator so I don't know if this is still true on the real deal but this doesn't quite work for how I use MSOLVR. With the solve app it seems if you have 3 equations you only get 3 variables. With MSOLVR, I get to enter some variables and then ask to solve for another that I didn't enter. If there is enough information in the other equations, then it gives me a result and if not it lets me know. Simple Example for what I call trapazoidal motion of a particle. My definition of this is a particle had constant acceleration for 1/3 of the time of the move, a constant velocity for 1/3 of the time of the move and constant deceleration (same as acceleration) for the last 1/3 time of the move. In industry, this is many times a nice approximation of the best balance between energy consumption and speed.. Many times we are using a motor an screw to produce this motion so I have an equation related to that as well. So I have the following variables: v: Constant Velocity t: total move time a: constant acceleration s: move distance N: screw RPM p: screw pitch And the following 3 equations: v=(3*s)/(2*t) a=(9*s)/(2*t^2) N=v/p When I start the solver i get function key menus for all the variables. I know in my head which ones I need to solve for the other ones. So I know I can put in time and distance and get out velocity and acceleration. I can put in velocity and time and get out distance. etc. I only have 3 equations but 6 variables. But because of the way the equations are linked, the MSOLVR keeps searching to see if it has enough information to solve for my requested variable. I don't see that functionality in the Prime emulator.