HP Forums
JTAG cable for HP30B? - Printable Version

+- HP Forums (https://archived.hpcalc.org/museumforum)
+-- Forum: HP Museum Forums (https://archived.hpcalc.org/museumforum/forum-1.html)
+--- Forum: Old HP Forum Archives (https://archived.hpcalc.org/museumforum/forum-2.html)
+--- Thread: JTAG cable for HP30B? (/thread-245805.html)

JTAG cable for HP30B? - John Ioannidis - 06-30-2013

I have found links on the net, but all point to long-since-defunct pages.

What kind of JTAG cable (a source and part number would be nice) should I get to attach to the HP30B (and HP20B) JTAG header?



Re: JTAG cable for HP30B? - Marcus von Cube, Germany - 07-01-2013

The programming cable that connects to the back of the calculator is NOT JTAG! It's a custom serial connection. Ask Gene Wright here in the forum if he still has some of the cables.

There are provisions for a JTAG connector inside the case. You'll need to cut out a rectangular opening in the back and solder a connector to the board. This is solely useful for hardware debugging and needs an appropriate debugging interface to work. I've modified my very first 20b in this way and connected it to an Olimex JTAG probe, controlled by the Eclipse debugger. This proved to be quite useful for the development of the hardware drivers (display, keyboard, timers) for the WP 34S project.

Re: JTAG cable for HP30B? - John Ioannidis - 07-01-2013

Yes, I know the 6-pin interface is not JTAG. Gene is already graciously sending me a programming cable, hopefully it will arrive soon!

I actually do want to connect to the JTAG port; I want to play with the hardware directly.