HP Forums
HP 67 problems - Printable Version

+- HP Forums (https://archived.hpcalc.org/museumforum)
+-- Forum: HP Museum Forums (https://archived.hpcalc.org/museumforum/forum-1.html)
+--- Forum: Old HP Forum Archives (https://archived.hpcalc.org/museumforum/forum-2.html)
+--- Thread: HP 67 problems (/thread-244905.html)



HP 67 problems - Manel - 06-11-2013

Hello

I bought a HP 67 and after a quick test, I opened it to repair then gum card reader. Once assembled everything I encounter two problems:

1 - The reader does not work, it does not take the card when I insert it. I tried to connect the motor directly to the battery and it works. I have also checked the circuit and it is closed when I start inserting the card. What is it wrong ? Maybe is the chip damaged ?

2 - When I switch to program mode, nothing changes. I also tested the continuity of the tracks and it seems ok ... How can I fix it ?



Thank you very much in advance



Manel


Edited: 11 June 2013, 5:40 p.m.


Re: HP 67 problems - BobVA - 06-11-2013

Welcome to the Forum, Manel!

You may find these links useful:

http://www.hpmuseum.org/guest/hoskins/67crfix.pdf

http://www.hpmuseum.org/cgi-sys/cgiwrap/hpmuseum/articles.cgi?read=179

Regards,
Bob