HP41 Memory Modules - Printable Version +- HP Forums (https://archived.hpcalc.org/museumforum) +-- Forum: HP Museum Forums (https://archived.hpcalc.org/museumforum/forum-1.html) +--- Forum: Old HP Forum Archives (https://archived.hpcalc.org/museumforum/forum-2.html) +--- Thread: HP41 Memory Modules (/thread-23395.html) |
HP41 Memory Modules - Ty Rogers - 10-27-2002 What memory modules are for what calculators? Will the Quad memory, 82106A, X memory modules work in all three 41 calculators?
Re: HP41 Memory Modules - Vieira, Luiz C. (Brazil) - 10-27-2002 Hi; plan memory modules as Quad Memory and single 82106A will ONLY work with the HP41C; both HP41CV and HP41CX will not use them and you may disrupt calculator operation if you try using them. X-Memory will work fine directly in an HP41CX, because it can only be ccessed by X-Functions. Anyway, if you have an HP41C/CV with X-Functions, X-Memory will work fine, too. Just an advice about X-Memories: maximum of tweo modules in a plan HP41 (I do not know anytinhg about modified calculators). And, in this case, a simple rule: plae them sided to eachother, never in the same column: internal connections will not allow two X-Memory to work in the same column. Hope this clarifies.
Cheers.
Re: HP41 Memory Modules - Raymond Del Tondo - 10-27-2002 Quad (82170A) or single memory modules (82106A) can only be used in the HP-41C,
You can use either *one* Quad memory Up to *two* X-Memory modules (82181A) can be used in the C, CV, or CX.
In the C or CV you need an additional X-Functions module (82180A) to gain access to the X-Memory. hth,
Raymond
Re: HP41 Memory Modules - Ty Rogers - 10-28-2002 Thanks Guys
|