HP Forums
HP42S power-on issue - Printable Version

+- HP Forums (https://archived.hpcalc.org/museumforum)
+-- Forum: HP Museum Forums (https://archived.hpcalc.org/museumforum/forum-1.html)
+--- Forum: Old HP Forum Archives (https://archived.hpcalc.org/museumforum/forum-2.html)
+--- Thread: HP42S power-on issue (/thread-226706.html)



HP42S power-on issue - David Persinger (US) - 07-10-2012

I have a new (for me) 42s. It seems to have an issue relating to turning on. Here is what happens.

- If it has been off for a while and I turn it on a message of "machine reset" appears on the screen.

- It can then be cycled off and on a few times without this happening, but eventually it will happen again even if it has not been off for very long.

- Then at some point it will not turn on again for some time. I'll come back to it several minutes later and it will turn on -- again with the "machine reset" message.

I could live with the machine reset, but it is a problem for it not to turn on at all sometimes.

I have removed the batteries. I have shorted the battery contacts for a few seconds.

Any thoughts? Can this be corrected? Do you think it is leading to complete failure of the unit?


Re: HP42S power-on issue - HAL9000 - 07-10-2012

You might want to take a look at this link:


Help with HP-42S


I have one with the same issue, it also BEEPS. I hope this helps.


Re: HP42S power-on issue - David Persinger (US) - 07-10-2012

I did see this before posting. The unit has new batteries and I did short the battery contacts.

The unit passes self-test and it does not beep when turned on.

Only issue is it does not always turn on and when it does it is sometimes with a "machine reset" message. But this usually occurs only after it has been off for some time (several minutes).