HP Forums
[wp34S] PSTO Won't Write to 6 thru 9 - Printable Version

+- HP Forums (https://archived.hpcalc.org/museumforum)
+-- Forum: HP Museum Forums (https://archived.hpcalc.org/museumforum/forum-1.html)
+--- Forum: Old HP Forum Archives (https://archived.hpcalc.org/museumforum/forum-2.html)
+--- Thread: [wp34S] PSTO Won't Write to 6 thru 9 (/thread-205624.html)



[wp34S] PSTO Won't Write to 6 thru 9 - Les Wright - 11-26-2011

Hi guys,

In my 30b-based wp34s, I have been fiddling with flashing and internal storage, etc.

I am chagrined to note that I same to only get access to libraries 0 thru 5 with the PSTO command. On my calc, the function won't accept 6 thru 9 as a parameter for the function.

All is well with the emulator, and I can PSTO to all ten libraries, just like the manual says I should.

Do I possible have a bad calc with bummed flash memory? It would be a shame to miss out on those extra 2000 program steps.

I am still using 2.2

Les


Re: [wp34S] PSTO Won't Write to 6 thru 9 - pascal_meheut - 11-26-2011

Some of the flash regions have been used to implement new functions such as matrix support.
This restriction does not apply to the emulator.


Re: [wp34S] PSTO Won't Write to 6 thru 9 - Paul Dale - 11-26-2011

The number of flash regions had to be reduced. The cost of the matrix functions primarily.

The emulator has no such restrictions since it isn't really limited by memory or disc space.


- Pauli


Re: [wp34S] PSTO Won't Write to 6 thru 9 - Les Wright - 11-26-2011

Whew! My 30b was a new but open box TAS sale. The price was right, but I was worried I had a hardware issue.

This issue does apply to 2.2, right? So all is normal with my calc?

Thanks,

Les

P.S. Another little glitch in this is that an askew insertion damaged a pin in my cable! Just ordered a fresh one from Gene. Dang, those little pins are delicate and I thought I was taking care. Take caution, guys!




Re: [wp34S] PSTO Won't Write to 6 thru 9 - Paul Dale - 11-26-2011

Yes this applies to 2.2. Matrix functions are present -- they aren't small.

Thus far, all the 3.x functionality has been done in a flash neutral manner -- in fact we've (Marcus predominately) saved enough to regain one flash region in addition to providing the extra functionality.


- Pauli


Re: [wp34S] PSTO Won't Write to 6 thru 9 - Walter B - 11-26-2011

Took the opportunity to update not only the v3.0 manual but v2.2 as well. Your calculator is perfectly alright :-)