HP Forums
WP 34S : [->] command question - Printable Version

+- HP Forums (https://archived.hpcalc.org/museumforum)
+-- Forum: HP Museum Forums (https://archived.hpcalc.org/museumforum/forum-1.html)
+--- Forum: Old HP Forum Archives (https://archived.hpcalc.org/museumforum/forum-2.html)
+--- Thread: WP 34S : [->] command question (/thread-191891.html)



WP 34S : [->] command question - Miguel Toro - 08-26-2011

Hi,

I apologize if this has been answered already, but I do not quite understand how [->] works in order to convert temporarily an integer from a base to another. Here are some examples :

In base 2, 11000b :
[->][blue 8] = 30o
[->][blue 16] = 18h , and I do not need to use [h] to do so.
So, What is the combination to get the base 10 conversion?

Now if I switch to base 16, how do I convert to other bases? [->] alone gives the "Eh" value, of course, but trying to use a combination like [f][->] to try to make it work, gets me an error message : "Bad mode error".

What am I doing wrong?

Thanks,

Miguel

Edited: 26 Aug 2011, 1:00 p.m.


Re: WP 34S : [->] command question - Marcus von Cube, Germany - 08-26-2011

Miguel, the sequence for temporary display in another base is ->, followed by the shift key, followed by the base. As you have already found out, the f shift key is optional.


Re: WP 34S : [->] command question - Miguel Toro - 08-26-2011

Thanks a lot Marcus,

Now I get it.

Regards,

Miguel


Re: WP 34S : [->] command question * Update * - Miguel Toro - 08-26-2011

That does not seem to work in hexadecimal mode, based on what the manual says (page 8):

To use [->] in hexadecimal mode, I have to press [f] first then [->]but if I do that:

[f][->] gives a "bad mode error"

What could be the problem there?

Thanks,

Miguel


Re: WP 34S : [->] command question * Update * - Marcus von Cube, Germany - 08-26-2011

This looks like a bug which needs to be fixed by us.

Edit: Found (and fixed) the bug but I need to build and commit it.

Edit again: The issue should be fixed now. In integer mode f, g and -> may be pressed in any order. In a base that takes E as a digit, f must precede ->. A second press of f after -> is not necessary.

Edited: 26 Aug 2011, 3:30 p.m.


Re: WP 34S : [->] command question * Update * - Walter B - 08-26-2011

Slightly deviates from the manual, pages 57f: after ->, g may be omitted. Defined this way for quite a long time. Sorry.

Walter


Re: WP 34S : [->] command question * Update * - Marcus von Cube, Germany - 08-27-2011

Quote:
pages 57f: after ->, g may be omitted

I assume it's still this way and I simply mixed it up in my comments here. Can you check with the latest emulator? I didn't change anything *after* the arrow, just the arrow detection itself which was definitely broken.