+- HP Forums (https://archived.hpcalc.org/museumforum)
+-- Forum: HP Museum Forums (https://archived.hpcalc.org/museumforum/forum-1.html)
+--- Forum: Old HP Forum Archives (https://archived.hpcalc.org/museumforum/forum-2.html)
+--- Thread: Repair/Replacing an HP 11C LCD (/thread-172368.html)
Repair/Replacing an HP 11C LCD - Jerry - 09-25-2010
Is it possible to repair or replace a HP 11C display or interchange it with a HP 12C display?
Re: Repair/Replacing an HP 11C LCD - Martin Pinckney - 09-25-2010
Jerry,
Many of the "experts" are at HHC, so you may have to wait to get your answers. I am not an expert, but from reading posts over the years, I think the answer is "yes", provided you use a 12c from the same production era. See this as a start.
You may be able to find the complete answer you need by searching the archives.
Re: Repair/Replacing an HP 11C LCD - aj04062 - 09-26-2010
Yes it is. I did it on a unit I own. This was my first attempt. The re-assembly process takes some practice and patience to get all LCD to operate correctly.
This was on a later unit with the single PCB. Earlier units with 2 PCBs are easier, I've heard (you need to swap parts from same to same)
Before:
2 disassembled units
After:
Edited: 26 Sept 2010, 8:04 a.m.