+- HP Forums (https://archived.hpcalc.org/museumforum)
+-- Forum: HP Museum Forums (https://archived.hpcalc.org/museumforum/forum-1.html)
+--- Forum: Old HP Forum Archives (https://archived.hpcalc.org/museumforum/forum-2.html)
+--- Thread: 48SX Soft Menu Key Problem (/thread-165437.html)
48SX Soft Menu Key Problem - J Grim - 04-06-2010
Greetings all,
I have a 48SX that I received on trade from a colleague. It works fine except that the soft menu keys must be pushed very hard in order to register. I think there must be a problem such as gunk under the keys, etc. Does anyone have advice regarding maintenance of these keys or the keyboard in general? Of course, I am hesitant to disassemble it without consulting with someone who may have done this before.
Thank you,
J Grim
Re: 48SX Soft Menu Key Problem - Han - 04-06-2010
If you press down on the bezel area between the bottom of the screen and the soft menu keys, does it make the menu keys register more easily?
If so, check out my repair guide from way back.
Re: 48SX Soft Menu Key Problem - J Grim - 04-06-2010
Thank you for the response. My 48 does behave in the manner you describe. When I push down on the bezel, the keys respond much better. I will probably try the repair myself. Thank you again.
J Grim
Re: 48SX Soft Menu Key Problem - NACHO - 04-06-2010
Quote:
Thank you for the response. My 48 does behave in the manner you describe. When I push down on the bezel, the keys respond much better. I will probably try the repair myself. Thank you again.J Grim
Common deffect in 48 series.
Han's document is perfect to know how.
just be careful.
Regards.
Nacho