HP Forums
New MLDL2000 Disassembler function - Printable Version

+- HP Forums (https://archived.hpcalc.org/museumforum)
+-- Forum: HP Museum Forums (https://archived.hpcalc.org/museumforum/forum-1.html)
+--- Forum: Old HP Forum Archives (https://archived.hpcalc.org/museumforum/forum-2.html)
+--- Thread: New MLDL2000 Disassembler function (/thread-163763.html)

New MLDL2000 Disassembler function - PeterP - 03-03-2010


I'm trying out the new MLDL200.exe from Meindert and the Disassembler function to SDK but I must be doing something wrong. I always get a 'Range Check' error. Here are the steps I do:

  • Open MLDL2000.exe
  • Open a ROM file from within the same directory as the MLDL2000.exe
  • Click on Show Fat
  • Click on Dissassemble

    The result is always the same, independent of the ROM I use - it shows pass 1, 2, 3, 4 in the status line at the bottom and then 'Range Check' Error comes up.

    Any hints?



    Re: New MLDL2000 Disassembler function - Vieira, Luiz C. (Brazil) - 03-03-2010

    Hi, Peter;

    I am using ML2K and I did exactly what you did and I could see different ROM listings. Usually I suppress [List FAT], but I tried with some ROM files with and without [List FAT]: works OK both ways.

    Have no 'Range Check' message (is it an error?) in any case, though.

    What ML2K Manager version are you using?


    Luiz (Brazil)

    Edited: 3 Mar 2010, 10:29 p.m.

    Re: New MLDL2000 Disassembler function - PeterP - 03-03-2010

    The new beta version 1.61. Meindert posted here a little while ago and it is up on his page. It has the new dissassembly function to SDK format so I wanted to try that.

    Thanks for checking Luiz, its great to see you around again so much here in the forum!!!



    Re: New MLDL2000 Disassembler function - Meindert Kuipers - 03-07-2010

    Some ROM files may result in this error, for example when a FAT entry point to a strange address outside this ROM, the error handling is not always as good as it should be. Always use the latest version (current is 1.61, but this is BETA still),