HP50g Units Conversions - Printable Version

+- HP Forums (https://archived.hpcalc.org/museumforum)
+-- Forum: HP Museum Forums (https://archived.hpcalc.org/museumforum/forum-1.html)
+--- Forum: Old HP Forum Archives (https://archived.hpcalc.org/museumforum/forum-2.html)
+--- Thread: HP50g Units Conversions (/thread-149068.html)

HP50g Units Conversions - Elliott W Jackson - 03-27-2009

I recently got an HP50g and have been plowing through the (shockingly bad) manuals. I was reading about the units capability, and stumbled on a trick I thought I would pass along.

## TASK: Convert a value from one unit to another. Example: Convert 100 cm to yards.

Assuming Flag117 is set (Soft menus), and RPN, and assuming the UNITS menu is already displayed (Rightshift UNITS)

the method documented in the manual is as follows:

100 Length "cm"
0 (or any value, this value is not actually used) "yd"
Next Next Next Units Tools Convert

That "Next Next Next Units Tools Convert" sequence is clumsy. Here is a much simpler method, relying on the calcutor's ability to add dissimilar units and do unit conversion as needed on the fly:

100 Length "cm"
0 (this time the zero is important) "yd"
+

I'm sure the 50g old-timers knew this, but I found it useful when I stumbled onto it.

Best,
Elliott

Re: HP50g Units Conversions - Michael de Estrada - 03-27-2009

Even easier, once you are in the length soft menu:

100 cm <Left Shift> yd

Michael

Re: HP50g Units Conversions - Frank Rottgardt - 03-28-2009

I donĀ“t own any HP-50g but a 48gx. My first HP calculator was a 28s that has been of great help during my university years.
In my opinion the unit coversion on the 28 series is more straight forward compared with the 48gx (50g?). The unshifted alpha keyboard is very useful when entering units. There is no need to plow through any menus, not even if one wants to convert rather complex&combined units that could be written as simple strings. Of course the 28s could not "calculate" with units. But I never thought this is a limitation. Generally I think the complexity of the 28s is already borderline and the 48 series was one (maybe two) steps to far in terms of intuitive use. With the 48gx I always feel somehow lost without the manual.

with the 28s (no menus needed):

100 "cm" "yd" convert

Re: HP50g Units Conversions - Elliott W Jackson - 03-28-2009

Quote:
Even easier, once you are in the length soft menu:

100 cm <Left Shift> yd

Michael

!!

Now why in the world is that not documented?!?!?!?

Thanks for sharing,
elliott

Re: HP50g Units Conversions - Michael de Estrada - 03-28-2009

Elliott,

You have only scratched the surface of all the information that is NOT included in the documentation for the HP-50g. The only reason I knew this is because I also own a 19 year old HP-48SX, which has wonderfully complete and clear spiral-bound printed documentation. Ah, those were the days!

BTW - Additional information is contained in the Advanced User's Reference Manual for the HP-49g+/48gII from the hp website (see here) This information also applies to the HP-50g.

Michael

Edited: 28 Mar 2009, 5:49 p.m.

Re: HP50g Units Conversions - Peter Klein - 03-28-2009

Frank: I know what you mean about the 48 series' complexity. After years with RPN calculators (25, 11C, 32S, 32Sii), I just found a 48S on Craig's List for \$30, and couldn't resist. I don't have a printed manual yet, and the Museum DVD's 48S/SX manual is graphics only (no searchable text), so the learning curve has been a bit steep.

But I remembered what a friend of mine who has a 48GX told me--"I can't remember how to do most things with it anymore, but it's worth having around just for the unit conversions). This thread came at exactly the right time to inform me about using the left shift key for conversion--thanks, Michael!

So now I can answer the age-old question: "If a train leaves Chicago at 6:00 AM traveling 50 mph, and a second train leaves New York at the same time, and they meet in Buffalo, what is the speed of the second train in furlongs per fortnight?"

--Peter

Re: HP50g Units Conversions - Peter Klein - 03-28-2009

Michael: How applicable is this 49g+ "Advanced User's Reference Manual" to the 48S? I downloaded it, and a lot of what I skimmed over looks like it would apply, with perhaps a few keystroke differences. And the PDF has searchable text.

Quote:
Elliott,

...I also own a 19 year old HP-48SX, which has wonderfully complete and clear spiral-bound printed documentation. Ah, those were the days!

BTW - Additional information is contained in the Advanced User's Reference Manual for the HP-49g+/48gII from the hp website (see here) This information also applies to the HP-50g.

Michael

Re: HP50g Units Conversions - Michael de Estrada - 03-28-2009

Peter,

All the commands, functions and reserved variables used in the HP48 are listed in the HP49g+ reference manual in section 3. Of course, many commands have been added, which do not apply to the HP48. Also, the HP48 lacks the CAS (computer algebra system) and the development library, so chapters 4 and 6 in the reference guide do not apply. One section I find especially useful is Appendix C, which lists and explains all the system flags. Only flags -1 through -64 apply to the HP48.

Michael

Re: HP50g Units Conversions - Egan Ford - 03-28-2009

Quote:
Michael: How applicable is this 49g+ "Advanced User's Reference Manual" to the 48S? I downloaded it, and a lot of what I skimmed over looks like it would apply, with perhaps a few keystroke differences. And the PDF has searchable text.

Why not just use the 48G Series AUR. It is probably closer to the 48S.
Re: HP50g Units Conversions - Michael de Estrada - 03-28-2009

It is a graphical scan, and does not have searchable text.

Re: HP50g Units Conversions - Marcus von Cube, Germany - 03-29-2009

I found a HTML version of the hp48gaur on my hard disk. I don't know where it came from, so I've put a copy here:

Re: HP50g Units Conversions - Chuck - 03-29-2009

Quote:
So now I can answer the age-old question: "If a train leaves Chicago at 6:00 AM traveling 50 mph, and a second train leaves New York at the same time, and they meet in Buffalo, what is the speed of the second train in furlongs per fortnight?"

Hmmm. Depending on which Buffalo, somewhere around 86,738 f/f possibly?

Someone had to. ;)

Re: HP50g Units Conversions - Martin Pinckney - 03-29-2009

Quote:
Frank: I know what you mean about the 48 series' complexity...
But I remembered what a friend of mine who has a 48GX told me--"I can't remember how to do most things with it anymore, but it's worth having around just for the unit conversions).

I am glad to know that others are willing to admit that they keep this extremely complex and capable device around for one function only... although I do use my 48sx occasionally for other tasks, using "canned" programs I downloaded...

Re: HP50g Units Conversions - Jeff Kearns - 03-29-2009

I get 93,930 furlongs/fortnight.