HP Forums
HP-41 Eramco Systems RAMBox - Printable Version

+- HP Forums (https://archived.hpcalc.org/museumforum)
+-- Forum: HP Museum Forums (https://archived.hpcalc.org/museumforum/forum-1.html)
+--- Forum: Old HP Forum Archives (https://archived.hpcalc.org/museumforum/forum-2.html)
+--- Thread: HP-41 Eramco Systems RAMBox (/thread-1427.html)



HP-41 Eramco Systems RAMBox - Dan Grelinger - 03-28-1999

Does anyone out there have the HP-41 Eramco Systems Compact Ram Unit (manufactured inside the card reader case)? I have two of them, but only one is functional. The functional one has the memory enable switches through the case. The non-functional one has no memory enable switches, is labeled SoftSelect, and the volatile software evaporated when the backup battery died. I am able to load software into the upper 8K, using write enable switches inside the unit, but cannot figure out the software commands to read/write enable the lower 24K. These functions were supplied with the original software, which I don't have. Any contacts would be appreciated. Thanks.


Re: HP-41 Eramco Systems RAMBox - steve - 03-30-1999

Try emailing someone at HPCC http://www.hpcc.org/index.html

I had some very obscure questions that were answered by their resident guru. (well, one obscure, and one really dumb one :-)