+- HP Forums (https://archived.hpcalc.org/museumforum)
+-- Forum: HP Museum Forums (https://archived.hpcalc.org/museumforum/forum-1.html)
+--- Forum: Old HP Forum Archives (https://archived.hpcalc.org/museumforum/forum-2.html)
+--- Thread: 50G: calling Stat49Pro (/thread-140862.html)
50G: calling Stat49Pro - Sancerre (Phoenix) - 09-16-2008
Hi,
I would like to be able to embed a Stat49Pro command inside of an algebraic equation that will subsequently be used with the numerical solver. Here is a simplified version of what I want to do:
Result=ZALPHA(x/y), where ZALPHA is a command from the Stat49Pro library. I haven't a whole lot of experience using external library calls in my equations, so I don't really know how to proceed.
Any and all help would be much appreciated.
Sancerre
(real name: Tod)
Re: 50G: calling Stat49Pro - Bruce Bergman - 09-17-2008
Just a side comment, and then I'll let someone else answer your direct question... ;-)
StatPro is one of the BEST programs for the 50g that I have ever come across. It truly brings the statistics capabilities of the 50g above and beyond those of all the TI-8x series. I wish that HP would just buy the source code and slam it in the ROM somewhere -- it would probably make the 50g the best calculator out there for stats.
Just MHO.
thanks,
bruce
Re: 50G: calling Stat49Pro - Stuart Sprott - 09-18-2008
Excuse my igorance, but what is Stat49Pro and where do you find it?
Sorry I can't help you with original question.
Regards Stuart.
Re: 50G: calling Stat49Pro - Damir - 09-18-2008
Quote:
Excuse my igorance, but what is Stat49Pro and where do you find it?Sorry I can't help you with original question.
Regards Stuart.
http://www.hpcalc.org/details.php?id=4442
Damir
Re: 50G: calling Stat49Pro - Marcus von Cube, Germany - 09-18-2008
I've downloaded the lib to my 50g and installed it in port 2. How can I run the commands from the prompt instead of the STAT menu? Do I need to enter a specific directory?
Re: 50G: calling Stat49Pro - Damir - 09-18-2008
Quote:
I've downloaded the lib to my 50g and installed it in port 2. How can I run the commands from the prompt instead of the STAT menu? Do I need to enter a specific directory?
[RightShift] [2] softkey [statp].
Regards,
Damir
Re: 50G: calling Stat49Pro - Marcus von Cube, Germany - 09-19-2008
I had to enter 1043 ATTACH once. Now it's there.
Re: 50G: calling Stat49Pro - Marcus von Cube, Germany - 09-19-2008
Tod,
I've played around a little and came to the following solution:
'ZALPHA(x)' does not work but you can embed the command in a program object:
<< -> x << x ZALPHA >> >> 'ZA' STO
Now, ZA is a function to be used in an algebraic expression.
Re: 50G: calling Stat49Pro - Sancerre (Phoenix) - 09-21-2008
Thx for the reply, I'll try this today!
Re: 50G: calling Stat49Pro - Stuart Sprott - 09-22-2008
Thanks Damir. I have located it and will try it out.