HP 35s REGY, REGZ ,REGX - Printable Version +- HP Forums (https://archived.hpcalc.org/museumforum) +-- Forum: HP Museum Forums (https://archived.hpcalc.org/museumforum/forum-1.html) +--- Forum: Old HP Forum Archives (https://archived.hpcalc.org/museumforum/forum-2.html) +--- Thread: HP 35s REGY, REGZ ,REGX (/thread-135078.html) |
HP 35s REGY, REGZ ,REGX - Howard Boardman - 03-31-2008 Where are these in the HP 33s and 35s for program operations? I see references to them on here but I don't seem them in the manual. Edited: 31 Mar 2008, 10:18 p.m.
Re: HP 35s REGY, REGZ ,REGX - designnut - 03-31-2008 It is under EQN, roll down. Then you can key 1 to 4 to select the desired register, Sam
Re: HP 35s REGY, REGZ ,REGX - Howard Boardman - 04-01-2008 THANKS!
Re: HP 35s REGY, REGZ ,REGX - Stefan Vorkoetter - 04-01-2008 Actually, you can press any key that brings up a menu on the 35s, and then press RollDown.
Re: HP 35s REGY, REGZ ,REGX - Marcus von Cube, Germany - 04-01-2008 But you can't do anything with the values, it is just a peek into the registers.
Re: HP 35s REGY, REGZ ,REGX - Stefan Vorkoetter - 04-01-2008 While entering a program, selecting one of the values enters a REGX, REGY, REGZ, or REGT instruction into the program. Alternatively, one can enter such an instruction using EQN mode (i.e. EQN, RCL R, RCL E, RCL G, RCL Y), and the resulting instruction looks identical to the equivalent instruction entered using the menu, but it takes up more memory and executes more slowly.
Stefan Edited: 1 Apr 2008, 12:51 p.m.
Re: HP 35s REGY, REGZ ,REGX - Palmer O. Hanson, Jr. - 04-01-2008 See poage B-7 of the manual.
OT: Palmer, did you see the HP 67 7x7 listing? - Gene Wright - 04-01-2008 It is available on PDF format now.
Re: OT: Palmer, did you see the HP 67 7x7 listing? - Palmer O. Hanson, Jr. - 04-01-2008 Gene: I saw that the listing is available on PDF. Unfortunately, the Adobe reader in my computer is broken. I will try to get to the library tomorrow and see if I can dump it there. I do have a working HP-67 thanks to repair by Viktor. I hit a documentation jackpot at a rummage sale today. Got an HP-25 which has a problem, an 83033A Battery Pack for the HP-97, four HP-67/97 Users' Library Solutions (Control Systems, Energy Conservation, Thermal and Transport Science, COGO Surveying), three HP-67/97 card pacs with documentation (Standard, ME Pac I, Cvil Engineering Pac 1), an HP-97 Owner's Handbook and Programming Guide and a bunch of HP-41 material, all for three dollars. Two days before that I got a Tandy 200 (successor to the Model 100) for $2.50 and two working calculators not listed in the Ball/Flamm book for twenty-five cents each. A good week for collecting!
The HP-25 comes on OK. I can change display modes, write programs, and enter numbers from the keyboard. I can STO and RCL. But doing any mathematical functions from the keyboard or in a program, even the decimal point, end up with 0.000000000 in the display and a changed display mode. Any ideas?
Re: OT: Palmer, did you see the HP 67 7x7 listing? - Palmer O. Hanson, Jr. - 04-02-2008 Gene: I managed to download the program today at the library. I will work on it tonight.
In the previous thread Bill asked if a plain C in the program didn't mean GSB C. You answered: Quote:Of course you are both correct. The plain C command shortcut is mentioned on page 203 of the HP-67 Owner's Manual and Programming Guide: Quote:I suggest that we would second the comment on clarity and ease of reference. Palmer
|