+- HP Forums (https://archived.hpcalc.org/museumforum)
+-- Forum: HP Museum Forums (https://archived.hpcalc.org/museumforum/forum-1.html)
+--- Forum: Old HP Forum Archives (https://archived.hpcalc.org/museumforum/forum-2.html)
+--- Thread: Are Seiko/Epson RAM cards compatible with the HP 48GX? (/thread-131782.html)
Are Seiko/Epson RAM cards compatible with the HP 48GX? - Gonzalo Fernandez (Spain) - 01-30-2008
I have one Seiko 128K RAM card for the HP 48GX, doesn´t have battery, when I put on my 48GX shows nothing, including when I do the autotest of the cards. (ON-D)
thanks
Re: Are Seiko/Epson RAM cards compatible with the HP 48GX? - Eric Smith - 01-30-2008
The cards for the 48SX and 48GX were customized versions of the Seiko/Epson cards (non-PCMCIA) that would work down to a lower voltage. The standard cards can cause problems as the calculator's batteries get low.
Re: Are Seiko/Epson RAM cards compatible with the HP 48GX? - Ron G. - 01-31-2008
ON-D gets you to test mode, but how do you go from there to testing the card?
Re: Are Seiko/Epson RAM cards compatible with the HP 48GX? - Raymond Del Tondo - 01-31-2008
While the three vertical lines are shown, simply press the up-arrow key.
This will test both port 1 and port 2 RAM non-destructively.
Don't worry if both ports are shown as on address #90000,
they're simply reconfigured during the test.
HTH
Raymond
Re: Are Seiko/Epson RAM cards compatible with the HP 48GX? - Ron G. - 01-31-2008
Thank you!