+- HP Forums (https://archived.hpcalc.org/museumforum)
+-- Forum: HP Museum Forums (https://archived.hpcalc.org/museumforum/forum-1.html)
+--- Forum: Old HP Forum Archives (https://archived.hpcalc.org/museumforum/forum-2.html)
+--- Thread: HP-48SX (/thread-11870.html)
HP-48SX - Dee Baxter - 10-19-2001
Does anyone know where I could get my 48Sx fixed in Indiana?
A few buttons you have to push hard to get them to work and that does not work all the time.
Thanks
Re: HP-48SX - Vieira, Luiz C. (Brazil) - 10-19-2001
Hello;
It´s been stated here that HP will replace out-of-production calcs for new, under production ones. The closest to yours is the HP48G+. I believe that even in Indiana, the HP office will take it and, later, you will receive a new one.
Otherwise, your SX can be fixed by unauthorized (trusteable, if well indicated) personal that will open a few holes in the calculator, open the case and clean the key contacts. HP won´t do that.
Reagards.
Re: HP-48SX - db (martinez, ca.) - 10-20-2001
if you go the hp & replacment route, first make sure that all your software will run on the new platform. i know someone who did that and now he has a shiny new in the box g-something and had to get an sx on ebay for his card.