I'm actually studying how to 'bankswitch' a Zeprom module.
I would like to burn the Hepax Rom I have yet (1B, 1C or 1D).
Curiously only two adresses have codes:
XFC7 100 ENBANK1
XFC9 180 ENBANK2
XFCB and XFCD don't have ENBANK3 and 4, just NOPs (?!).
I understood the principle but would like to know if someone had experience in that activity.
Thanks for assistance.
Edited: 7 Dec 2003, 4:23 a.m.
Hi Emmanuel,
It may be me the one to blame... sorry, as for the Addresses you've checked, it semmed like if you have took a look at a previous post I wrote to Meindert Kuipers regarding a similar question. If so, my apologies go to you.
Those addresses were wrong, (not too far though :-)
Here you are the correct Bankswitch & Retun Addresses:
XFC3: H'140, H'3E0 ENBANK3
XFC5: H'1C0, H'3E0 ENBANK4
XFC7: H'100, H'3E0 ENBANK1
XFC9: H'180, H'3E0 ENBANK2
Hope this helps.
Diego.
Yes, you are right and I was wrong.
Please accept my apologies.
Thanks to remind me of that point.
I'm loosing my memory...Sorry I'm aged. ;o)