10-11-2006, 03:14 AM
10-11-2006, 06:50 AM
I drill out the pins in the battery department and then bend it apart slowly but with quite some force until the lower pins snap. However, it could be a good idea to try cleaning it in an ultrasonic cleaner first, as that might save you from taking it apart.
Regards,
Erik Ehrling (Sweden)
PS. If nothing else helps - http://www.fixthatcalc.com/
Edited: 11 Oct 2006, 6:52 a.m.
10-11-2006, 07:46 AM
You might find this forum article and this one helpful.